Baileigh MSS-18 shrinker stretcher
*Images for reference only.
Looking for the perfect entry-level Metal Shrinker and Stretcher? Our 2-headed design saves time. No need to switch jaws! Unlike most competitors, we include a stand with foot pedal control with this MSS-18 Sheet Metal Shrinker.
Recommended for: Entry-level sheet metal shaping, especially in automotive and airplane shops.
Note: Square corner jaws on this model can leave small indents that require additional smoothing. For a shrinker stretcher without square corner jaws, check out the MSS-16F.
Features
- 18-gauge mild steel and 16-gauge aluminum capacity
- 1.5” throat depth lets you work on the edges of panels
- Comes assembled with shrinker and stretcher jaws—everything you need to get started
- Jaws are in separate iron housings, so you don’t have to change tooling between functions
- Foot pedal control leaves both your hands free to guide the material
- Comfortable stand height gives you good leverage and makes your job easier
- Heavy cast iron construction allows the shrinker stretcher to reliably work at full capacity over many years of use
Specifications
| Mild Steel Capacity (Gauge) | 18.0000 |
| Model Number | MSS-18 |
| Throat Depth (In.) | 1.5" |
| Weight (Lbs.) | 81 |
*Specifications subject to change without notice.
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
