Race Ramps RR-RESTYLE-20 Restyler Magna Ramps(w/metal) - Black

Race Ramps

Factory Shipped

Total Price:
$3,180.00 $3,021.00
(You save $159.00)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Race Ramps RR-RESTYLE-20 Restyler Magna Ramps(w/metal) - Black

Safely and easily lift your vehicle up 14″ for vinyl wrapping, detailing, installing paint protection, display, or maintenance with our Restyler Magna Ramps. Featuring an angle of approach of 10.36 degrees, the ramp system is available in a 16″ width (for tires up to 14″ wide) and a 20″ width (for tires up to 18″ wide). The system accommodates wheelbases from 82″ to 128″ and both sizes include steel strips built into the ramp for directly holding magnetic tools and/or a magnetic shelf.

Each Restyler Ramp consists of five interlocking pieces that combined weigh only 110 lbs., with no one piece weighing more than 40 lbs. Once the car is safely on the blocks, the center “bridge” piece can be removed from each side for easier access underneath the car – or for use as a bench or step stool for more convenient access to the whole vehicle. The incline portion can also be removed for greater accessibility around the car.

The ramp system has a total vehicle weight capacity of 6,000 lbs. and comes with one pair of inclines. For either width, an additional set of inclines is available that will interlock to the front and enable a vehicle to smoothly drive up and down both ends. This convenient and portable setup is great for use in the shop as well as when you’re on-the-go to other job locations. Watch all these great features in action in the video to the left by Justin Pate of The Wrap Institute.

If you’re working with cars really low to the ground (Lamborghinis and Ferraris!), the optional XTenders will decrease your angle of approach to only 6.8 degrees, allowing you to work on virtually any car without banging up its nose.


  • Full-length 14" lift for vinyl wrapping, detailing, display, or maintenance
  • 16" or 20" ramp width options
  • 82" to 128" adjustable wheelbase
  • Five modular sections per ramp, no piece more than 40 lbs.
  • Set of two full ramps


  • Dimensions: See matrix, varies by version
  • Angle of approach: 10.36 degrees
  • Wheelbase: 82″ to 128″
  • Ramp weight capacity: 1,500 lbs. per ramp
  • Total vehicle weight capacity: 6,000 lbs.
  • Maximum tire width: See matrix, varies by version
  • Product weight: 110 lbs. per ramp
  • Sold as: 16″ width (RR-RESTYLE-16) or 20″ width (RR-RESTYLE-20)
  • Shipping: Ships via freight, so packaging and rates vary. Call [número de teléfono eliminado por eBay] for more information.

 Safely and easily lift your vehicle up 14″ for vinyl wrapping, detailing, installing paint protection, display, or maintenance.

  • Once car is in place, remove center “bridge” piece and incline portion for amazing accessibility below and around the car.
  • 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
  •  Lightweight, yet strong and durable.
  • Will not rust or transfer heat or cold.
  • No-skid, no-scuff material protects your garage flooring and trunk from damage.
  •  Sold as a set of two full ramps, each consisting of five interlocking pieces.
  •  When buying directly from this site, they come with a 30-day satisfaction guarantee. Proudly made in the USA!


• Use on a level, flat surface.

• Ensure that the bottom of each ramp makes full contact with a solid surface.

• Do not exceed the recommended maximum tire width or maximum total vehicle weight capacity.

• Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace.

• When vehicle is in place, put vehicle in park (or in reverse gear for manual transmissions) and set emergency brake.

• Place wheel chocks behind each tire during use.


Shipping Policy:

  • For big equipment, the customer MUST have a forklift or request a lift-gate service (if applicable) to unload the equipment. Keep in mind Lift-gate service will have an additional cost based on the equipment's model and/or weight. The customer will ALWAYS be contacted to verify this information.
  • Please provide (when possible) a business or commercial address to avoid additional fees. 
  • If the address is residential customer will be contacted and will be charged an extra fee. Fees may vary based on the equipment purchased. (Residential areas are determined by freight or shipping company and not by JMC Equipment)
  • Tax fee may apply to some orders. If the customer is eligible for a tax fee he/she will be contacted to charge the amount. The tax fee is not charged by JMC Equipment, Its fee provided directly by the manufacturer.
  • Please provide an accurate contact number to avoid delays.
  • The customer is responsible for keeping track of his order and receiving it. Not being present at the time of delivery might lead to a re-delivery fee. 
  • Please BE AWARE of delivery, the recipient must inspect the package before the driver leaves, any visual damage must be noted on the delivery form or bill of lading.


  • Due to our large product line, the photo may not be an exact representation of the item PLEASE read the description carefully before purchasing to avoid any inconvenience.

Return Policy:

  • The item must be in its original package.
  • Returns can only be done by contacting JMC Equipment through the selling account and not directly with the manufacturer. (The RGA # can only be provided by JMC Equipment)
  • If the item has been open customer will be held responsible for repackaging the item. 
  • There will be a restocking fee to send back the item, this will be deducted from the total amount of the refund. (Re-stocking fees will vary based on equipment and manufacturers policy )
  • Return process and refund can take from 5 to 8 business days. 
  • The customer will be held responsible for shipping the item back to the manufacturer and its cost. The customer needs to provide JMC Equipment with the tracking number for the return. 
  • The refund will be provided only after the items or equipment have been returned and inspected by the manufacturer. JMC Equipment will notify the customer of the total amount of the refund.


1-Year Warranty

Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are backed by a one-year warranty. Our warranty is strictly limited to the repair or replacement of manufacturer defects and does not cover damage to a car, personal injury, labor, or any other damage or injury. Race Ramps LLC is not responsible for the damage caused by improper or unintended use. In no event shall Race Ramps LLC be responsible for consequential damage or costs. The warranty shall terminate one year from the date of purchase by the original owner and is not transferable. Because we are continuously conducting research and development, specifications are subject to change without notice. Those items sold by Race Ramps LLC, but manufactured by other companies are subject to the manufacturer’s warranty and policy.


30 Days to love it or get a full refund!

At Race Ramps, customer satisfaction is paramount. If you receive your product and you are not 100% satisfied with it before the first 30 days, we will take it back and provide you with a prompt, product-only refund or exchange.

 Please note that the original shipping and handling charges are non-refundable.
30 Days to love it or get a full refund!


To initiate a return, please call us at 800-562-4791, or contact us online at so that we can send you a Return Goods Authorization (RGA) number prior to shipping your return. 


Race Ramps are designed to:

  1. Work with cars that have high-performance, high-speed rated tires. Do not use them with heavy lug mud tires or extra narrow tires.
  2. Support 1,500 lbs. per tire, per ramp, by spreading the weight of the car over the entire width of each ramp.
  3. Be placed on a flat surface. Do not use Race Ramps to bridge any gap.
  4. Be kept in temperatures below 150° Fahrenheit (65.56° Celsius)

There may be a slight impression (up to 1/8″) left on the surface of Race Ramps caused by the vehicle tire weight settling the inner core of the ramps. This is normal.

When using Race Ramps on cement or asphalt, it is best to sweep the area first. Rocks and debris left under Race Ramps can act like small ball bearings and may cause the ramps to slide and may cause denting and pitting of the ramps.

We do not recommend using wood, metal, or any other materials with our ramps. Contact our tech support group (866)464-2788 or if you are having issues with our ramps or loading.


Use a scrub brush with soap and water or if on the road use WD-40. Spray WD-40 on and wipe it off with a clean rag.


Race Ramps can be used indoors or outdoors as long as the surface temperature of the ramps does not exceed 150° Fahrenheit (65.56° Celsius). When using Race Ramps outside avoid exposing them to direct sunlight for a long period of time. In warmer climates, do not store them outside or in the trunk of your car.


Race Ramps are impervious to most automotive fluids. However, some fluids may penetrate the ramps if left on the surface area for prolonged periods of time. Other fluids have been known to stain the ramps if not immediately removed!


Frequently Bought Together

Please choose options for all selected products

  • Choose Options