AirCat 1994 1" Super Duty Straight Impact Wrench With 8" Ext. Anvil
1" x 8" Extended "Super Duty" Impact Wrench
Features
- Provides 2,300 ft-lb maximum torque and 2,500 ft-lb of loosening torque
- Low maintenance pin-less hammer provides ultimate reliability and added hitting power
- Combined forward/reverse and power management switch
- Triple heat treated alloy steel hammer cage and anvil
- Rugged construction with reliable bolt-on assist side handle
- Hammer case can be repositioned for the side handle to be on right or left side
Specifications
| Length (in.) | 26 |
|---|---|
| Width (in.) | 8.6 |
| Height (in.) | 7.2 |
| Weight (lbs.) | 35 |
| Bolt Capacity (in.) | 1-1/4 |
| Loosening Torque (ft-lbs) | 2500 |
| Working Torque (ft-lb) | 345-1610 |
| Air Cons. (CFM) | 16 |
| Rec. Hose Size (in.) | 1/2 |
| Air Inlet (in.) NPT/BSP | 1/2 NPT |
| Vibration Level (m/sec2) | 9.6 |
| Noise Level d(B)A | 109 |
| Square Drive (in.) | 1 x 8 |
| Free Speed (RPM) | 4500 |
| Impacts Per Minute (IPM) | 1100 |
| Max. Torque (ft-lb) | 2300 |
Downloads
Aircat Warranty
AIRCAT and NITROCAT air tools are warranted to be free from defects in material and workmanship for 2 years from date of purchase. We will repair or replace; at our option any defective part or unit which proves to be defective in material or workmanship during this 2 year period. The foregoing obligation is AIRCAT and Florida Pneumatic's sole liability under this or any implied warranty, under no circumstances shall it be liable for any incidental or consequential damages.
This warranty applies to the tool only. The warranty does not apply to any attached accessories/consumable products; such as drill chucks, sander backing pads, air hammer retainers and chisels or “kit” accessories or any other accessory included with the tool.
Any repair due to normal wear and tear, abuse, misuse, modification of the tool or repair attempts (by other than an AIRCAT or Florida Pneumatic Authorized Service Center) are not covered by this warranty.
Return your tool to an AIRCAT or Florida Pneumatic Authorized Service Center freight prepaid. Be sure to include your name, address, copy of purchase with date and description of the suspected defect.
AIRCAT whose policy is continued product improvement reserves the right to make changes in design or construction at any time without incurring any obligation on tools previously sold.
Tune-Up and Head Kits for all AIRCAT PNEUMATIC impact wrenches and ratchets are available. For Authorized Service Centers, please visit www.aircat.com
