RGI Mobile Prep-Station
CODE COMPLIANCE: RGI manufactures and designs paint booths to meet applicable industry codes and standards. Please be aware that local requirements may vary from national codes. RGI recommends consulting local authorities before purchasing paint booths.
- Reference NFPA 33 and Chapter 24 of the International Fire Code (IFC) for spray applications using flammable and combustible materials
- Reference NFPA 86 and Chapter 30 of the IFC for curing and drying applications
- Many components and product lines are ETL and ETL-C listed. The ETL or ETL-C mark is proof of compliance with North American safety standards, including UL, NFPA, OSHA and more
- A UL or CUL listing verifies that Underwriters Laboratories has tested RGI’ product and determined that it meets their stringent safety and performance requirements
 |
 |
 |
Specifications
- Construction: Pre-punched single wall panels 18 ga. galvanized steel panels Self-support airtight construction 6" O.C precision punched
- Mechanical & Motor: (1) - 30” 12,900 CFM Tube-axial fan. (1) - 2HP-3PH-240v motor High capacity exhaust & intake Directly connected to turbine
- Lighting: 4' light fixtures with 4 LED lamps (2) upper horizontal light fixtures Energy efficient ballast 120V 60Hz
- Filtration: [5] - Exhaust filters 1-30"x10' long
Optional Product
- Control VFD unit brings together or combines motor control devices and circuit protection. The control panel protects these devices from moisture, corrosion, dust, and other damage.
- Powder coat ultra white inside and outside the Prep-Stations. Covers all panels.
- Fire system with piping for prep station. Fire systems need to cover all working areas and ducting exhaust vents. Fire systems need to be installed be NFPA no 17
- 8' H CURTAIN Auto bay curtain with hardware and tracking for prep area or clean area. Curtain chain sewn into the bottom hem with nylon roller with 1" hook.
Downloads
LIMITED WARRANTY
All paint spray booths manufactured by RGI Mfg. Co. (RGI) are warranted by RGI, against defects in workmanship for materials under normal use for one year after the date of purchase from RGI. Any part which is determined by RGI to be defective in material or workmanship and is returned to RGI, shipping cost prepaid, will be, as the exclusive remedy, repaired or replaced at RGI’s option.
All paint spray booths manufactured by RGI Mfg. Co. (RGI) are warranted by RGI, against defects in workmanship for materials under normal use for one year after the date of purchase from RGI. Any part which is determined by RGI to be defective in material or workmanship and is returned to RGI, shipping cost prepaid, will be, as the exclusive remedy, repaired or replaced at RGI’s option.
LIMITATIONS OF LIABILITY
Any liability of consequential and incidental damages is expressly disclaimed. RGI’s liability in all events is limited to, and shall not exceed, the replacement price of the part.
PRODUCT SUITABILITY
All states and localities have codes and regulations governing the construction, installation and/or use of paint spray booths, which may be interpreted differently from those in neighboring areas. While RGI attempts to assure that it’s spray booths comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the spraybooth is installed or used. Before the purchase and use of a spray booth, please review the spray booth application, and national and local codes and regulations, and be sure that the product, installation and use comply with them.
FREIGHT LOSS OR DAMAGE POLICY
Unless otherwise specified, RGI accepts no responsibility for loss or damages to products shipped from RGI unless said products are shipped freight prepaid by RGI. Exception: If it is determined by RGI that loss or damage occurred as a result of negligence on the part of RGI, RGI will replace the lost or damaged articles. If such a determination is made by RGI, replacement of lost or damaged articles will occur only after receipt of a written request, from the purchaser.
