Bendpak HDS-14LSX Alignment Equipment Package Deal


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Free Shipping
Total Price:
MSRP: $17,394.00
(You save  $2,899.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendpak HDS-14LSX Alignment Equipment Package Deal

This package deal includes:  (1) HD-14LSX + (2) RB7W + (1) Airline Kit


Bendpak HDS-14LSX 14,000 Lbs Extended Alignment Lift

HDS-14LSX 14,000-lb. Capacity / Alignment Lift / Extended / Includes Turnplates and Slip Plates (5175171)

The legendary, 14,000-lb. capacity HDS-14LSX alignment lift pulls double duty as both car lift and alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize convenience. Even though the vehicle is completely secure, the wheels respond to your every adjustment with virtually no resistance.

Imagine the raw lifting power of BendPak’s best combined with a free-floating, four-wheel alignment system. Your job just got easier. This model is available with optional drive-thru ramps, drip trays and rolling jacks.

 Bendpak HDS-14LSX Alignment Lift


  • 14,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Two runway lengths to choose
  • Heavy duty turn plates and integrated rear slip plates included
  • Multi-position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal "Anti-Sway" slider blocks in each column
  • Features oversize sheaves and heavy-duty 1/2” aircraft cable
  • Rugged 1-3/8" roller axles and oversize self-lubricating cable sheaves
  • Multi-position safety locks in each column with push button safety release
  • Runways adjust for different tread widths and feature non-skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model RBJ7000)


 Lifting Capacity*  14.000 lbs. (6350 kg)
 *Max Capacity / Front Axle  7000 lbs. (3175 kg)
 *Max Capacity / Rear Axle  7000 lbs. (3175 kg)
 A - Min. Runway Height:  7,625" (194 mm)
 B - Max. Rise:  70" (1778 mm)
 C - Max. Lifting Height:  77,625" (1972 mm)
 Time to Full Rise:  60 seconds
 Outside Dimensions  
 D - Overall Width:  130" (3302 mm)
 E - Outside Length:  213" (5410 mm)
 F - Overall Length:  241" (6121 mm)
 G - Height of Columns:  95" (2413 mm)
 Inside Dimensions  
 H - Width Between Columns:  120" (3048 mm)
 I - Drive-Thru Clearance:  98" (2489 mm)
 J - Runway Width:  20" (508 mm)
 K - Length of Runways:  199" (5055 mm)
 L - Width Between Runways:  37,5" (953 mm) or 51" (1295 mm)
 M - Min. 4-Wheel Alignment:  89" (2261 mm)
 N - Max. 4-Wheel Alignment:  156" (3962 mm)
 O - Max. 2-Wheel Alignment:  182" (4623 mm)
 Minimum Wheelbase  
 Rated Capacity:  140" (3556 mm)
 75% Capacity:  120" (3048 mm)
 50% Capacity:  100" (2540 mm)
 25% Capacity:  80" (2032 mm)
 Locking Positions:  13
 Lock Spacing:  4"
 Power Unit  
 Motor:  220 VAC / 60 Hz / 1 Ph
 Noise:  45 dB
 Weight:  3,067-lbs. (1,391 kg)
 Dimensions:  209" x 23" x 42" (5,308 mm x 584 mm x 1,066 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


BendPak RJ7W 7,000 Lb. Capacity , Easy-Roll Wheels Rolling Bridge Jack

RJ7W 7,000-lb. Capacity / Rolling Bridge Jack (5175249)

BendPak’s 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.

 RBJ7000 Rolling Jack


  • 7,000-lb. lifting capacity
  • Easy-Roll Wheels
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Optional air-line kit


 Lifting Capacity  7,000 lbs. (3,175 kg)
 Suitable Lift Model(s)  HDS-14 Series, HDSO14P, HD-14 Series
 Min. Drive-Over Height*  
 Pad Only:  4" (102 mm)
 Pad + 2.75" Adapter:  6.75" (171 mm)
 Pad + 5.5" Adapter:  9.5" (241 mm)
 Max. Lifting Height*  
 Pad Only:  14.75" (375 mm)
 Pad + 2.75" Adapter:  17.5" (445 mm)
 Pad + 5.5" Adapter:  20.25" (514 mm)
 Support Base Width:  36.25" (921 mm) - 46.5" (1,181 mm)
 Max. Arm Reach:  56" (1,422 mm)
 Min. Arm Reach:  42" (1,067 mm)
 Time to Full Rise:  55 seconds
 Pump:  Air/Hydraulic
 Air Pressure:  125 PSI (10-25 CFM)
 Max. Operating Hydraulic Pressure:  4,550 PSI
 Power Requirement:  None
 Shipping Weight:  440 lbs. (200 kg)
 Shipping Dimensions:  42" x 25" x 15" (1,066 mm x 635 mm x 381 mm)

* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.


Bendpak Airline Kit For HD-9/HD-14

Airline Kit Integrated Rolling Bridge Airline Kit (5174009)

Rolling bridge jacks are great for extending the functionality of your BendPak four-post lift, and they're about to get a whole lot better. Install this helpful kit and elegantly hide the airlines beneath your lift's own runways. One kit provides air infrastructure for two jacks.

This integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks.

 Airline Kit of Bendpak


  • Allows bridge jack pneumatic airlines to be gracefully hidden beneath lift runways
  • Provide Air to Two Bridge Jacks at Once
  • High-quality mounts
  • Airline included

Note: Hose length varies depending on lift model. Order the appropriate Air Line Kit according to your lift model.

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.