Zinko ZFM-30 Forming And Cutting Machine, Portable Unit
The Zinko ZFM Series Metal Forming Machine makes an excellent choice for any application that requires the portable forming of angle iron or steel. Capable of V-notching, angle bending, corner cutting, edge cutting or hole punching in angle up to 3" x 3" x 0.25" thick angle.
Features:
- Rated at 23 tons this small machine can form up to 0.25" thick steel or stainless steal angle.
- V-notching, corner cut and bending dies are permanently fixed so there are no die changes necessary except for punching applications.
- Lightweight and portable this tool can easily to move to a jobsite or can be mounted in a permanent location per operator's requirements.
- Two cylinder system with selectable hand lever makes switching tasks easy.
- Clamping base is easy to operate and fixes material to machine.
- Machine can be used with a separate hand pump, air hydraulic pump or electric hydraulic pump.
Specification:
| Capacity | 3" x 3" x 0.25" |
| Ram Capacities Bending (ton) | 17 |
| Ram Capacities V-Notching (ton) | 23 |
| Stroke (in) | 1.38" |
| Dimensions | 12.44" x 8.66" x 11.61" |
| Weight (lbs) | 110 |
| Suggested Components | Hydraulic Pump Hose Coupler |
LIMITED WARRANTY
ZINKO makes every effort to assure that its products meet high quality and durability standards and warrants to the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship as follows:
1 year limited warranty on all ZINKO products unless specified otherwise. Warranty does not apply to defects due directly to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities or to a lack of maintenance. ZINKO LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE FROM THE DATETHE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES ORMERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOWLONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
In no event shall ZINKO be liable for incidental or consequential damages. The liability of ZINKO on any claim for loss or damage arising out of the sale, resale, or use of a jack or related service equipment shall in no event exceed the purchase price. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTALOR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
To take advantage of this warranty, the product or part must be return for examination, postage prepaid, to an Authorized Repair Station designated by our Ontario, California office. Proof of purchase date and explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, ZINKO will either repair or replace the product or refund the purchase price if we cannot readily and quickly provide a repair or replacement, if you are willing to accept such refund. ZINKO will return repaired product or replacement at ZINKO expense. If it is determined there is no defect, or that the defect resulted from cause not within the scope of ZINKO warranty, then the user must bear the cost of storing and returning the products. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For service contact your local distributor.
* MODEL AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
