Stratus SAE-UT10000 On-Ground Surface Mount or In-Ground Flush Mount Low Profile Full Rise Scissor Lift, 10000 lbs, 220V, Pneumatic Release
This low-profile double scissor lift comes with On-Ground surface mount or In-Ground flush mount design, it is pneumatic safety lock release with overload protection, easy to operate and maintain. Full size scissor car lift is suitable to hold 10,000 lbs. or less, ideally for inspection, repair and maintenance of various types of vehicles.
Features
- Commercial grade open center design.
- On-Ground surface mount or In-ground flush mount.
- Low profile, minimum height is 4 5/16".
- Pneumatic safety lock release.
- Durable cylinders with anti-surge valves.
- Alloy solid steel X structure, good rust resistance and not easy to deform.
- Ramp can be used as platform extension suitable for different length of chassis.
- Wear-resisting bearings.
- 24V low voltage control system.
- Platforms can be extended for long vehicles.
- Self-lubricated bushing and bearing.
- Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity.
- Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004).
Specifications
Model | UT10000 |
Capacity | 10,000 LBS |
Lifting Time | ~90SEC |
Max Height | 72 1/16” (1830 MM) |
Min Height | 4 5/16” (110 MM) |
Runway Length without Ramps | 60 1/4” (1530 MM) |
Runway Length with Ramps | 84 1/4” (2140 MM) |
Overall Width | 85 13/16” (2180 MM) |
Runway Width | 26 3/16” (665 MM) |
Between Runway | 33 7/16” (850 MM) |
Motor | 4 HP, 220V, 60 HZ, 1ph |
Oil | AW32 or AW46 |
Breaker | 30A |
Platform Weight | 2,006 LBS |
Platform Dimension | 69” L * 29” W * 19” H |
Control Panel Weight | 198 LBS |
Control Panel Dimension | 44” L * 18” W * 22” H |
*Important Notes
1. A $250 surcharge apply to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
2. The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading.
3. Discounts provided for pickups in College Station, Texas Warehouse.
Downloads
Warranty Information
- 5 years lifting structure, 3 years hydraulic, and 2 years electrical.
- Note: Parts only and labor costs for someone to install the replacement part are NOT covered. The hydraulic cylinders come with a 30-day full warranty and after 30 days we will provide a seal kit.