JET Tools BDB1340A Lathe W/ CBS-1340A Stand
JET Belt Drive Bench Lathes feature an enclosed gearbox with helical cut gears for noise reduction and smooth operation. The full length splash guard on all sizes prevents hot chips and fluid from contaminating the work area and the quick change gearbox allows for fast and easy gear changes for metric threading.
Features
- Enclosed gearbox design provides smooth, quiet operation.
- Fast, easy speed changes.
- Low voltage motor controls.
- Helical cut headstock gears reduce noise.
- Change gears allow metric threading.
- Spindle is supported by precision tapered roller bearings.
- V-way bed is induction hardened and ground.
- Gap bed section provided for large diameter work.
- Independent lead screw and feed rod.
- T-slotted compound slide with four-way tool post.
- Carriage mounted spindle control lever.
- Automatic feeding and threading are fully interlocked.
- Feed selectors travel in grooved ways.
- Tailstock may be offset for turning tapers and includes and inch/metric graduated quill.
- Oil pan included.
- Tolerance test certificate included.
- 6" 3-jaw direct mount scroll chuck with top reversing jaws.
- 8" 4-jaw independent chuck.
- 12" faceplate.
- Four-way tool post.
- Steady and follow rest.
- Metric change gear.
- Centers and headstock center sleeves.
- Threading dial.
- Toolbox with tools.
Specifications
| Model Number | BDB-1340A |
| Carriage Travel (In.) | 35 |
| Compound Slide Travel (In.) | 2-11/16 |
| Drive | Belt |
| Length of Gap (In.) | 8 |
| Max Tool Size (In.) | 5/8 x 5/8 |
| Motor (HP) | 2 HP, 230V, 1Ph |
| Number of Inch Threads | 38 |
| Number of Longitudinal and Cross Feed Rates | 38 |
| Number of Metric Threads | 23 |
| Number of Spindle Speeds | 12 |
| Overall Dimensions (L x W x H) (In.) | 71 x 32 x 45 |
| Range of Cross Feeds (IPR) | 0.0006-0.013 |
| Range of Inch Threads (TPI) | 3-1/2 - 80 |
| Range of Longitudinal Feeds (IPR) | 0.0018-0.0374 |
| Range of Metric Threads | 0.45-10 |
| Range of Spindle Speeds (RPM) | 60 - 1,240 |
| Size | 13 x 40 |
| Spindle Bore (In.) | 1-3/8 |
| Spindle Mount | D1-4 |
| Spindle Taper with Sleeve | MT-5 (MT-3) |
| Steady Rest Capacity (In.) | 2-5-8 |
| Style (Type) | Bench |
| Swing Over Bed (In.) | 13 |
| Swing Over Cross Slide (In.) | 7-25/32 |
| Swing Through Gap (In.) | 18-3/4 |
| Tailstock Spindle Travel (In.) | 3-3/4 |
| Taper in Tailstock Spindle | MT-3 |
| Weight (Lbs.) | 1175 |
| Width of Bed (In.) | 7-3/8 |
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
