GMC PBR-0510E Power Bending Rolls 5 ft x 10 Ga
Features
- SO 9001 certified.
- All (3) rolls are hardened rolls, up to 50-52 HRC
- 3-rollers are driven to perform high accuracy.
- Adjustable cone attachment included.
- 3/8”, ½” and 5/8” grooves on rollers.
- One wheel one-side operated for bending roll.
- One wheel one-site operated for pinch roll (E model is powered).
- Heavy duty casting frame.
- Heavy duty all steel welded construction.
- 1/3 of full length in middle of roller is straight, and two ends with crown to get perfect round performance.
- Quiet running operation.
- Easy swing-out top roller.
- Safety line all around the machine for emergency stop.
- All rolls run forward and reverse.
- Safety type forward/reverse foot pedal.
- Power source 220V, (option: 440V, 3 phase).
Specifications
| Capacity: Mild Steel | 5'1" x 10Ga. |
| Capacity: Stainless Steel | 5’1” x 12Ga. |
| Roll Dia. | 4 3/4" |
| Min. Bending Dia. Inch | 6" |
| Pre-bend inch | 0.12" |
| Rolls Speed ft/min | 20 |
| Rolls Opening | 1/2" |
| Main Motor | 3HP 3PH |
| Weight | 3,050 lbs. |
| Overall Dimensions | 96" x 32" x 52" |
Standard Included Equipment
- Adjustable cone attachment.
- 3/8”, 1/2” and 5/8” grooves on rollers.
- All (3) hardened rolls.
- Removable safety foot pedal.
- Operation & parts manual.
- Orange color front cover is optional (Sold Separately).
- E models come with motorized bending roll up/down w/ push button and digital display for easy operation of repeat jobs.
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
