GMC HS-0410E 4 ft x 10 Ga Hydraulic Shear - Shearing Machine
Features
- ISO 9001 certified.
- 24” German SIKO Front Operated power back gauge w/ micro adjustment 0.004”, inch/mm digital display.
- Quick Change Blade Gap Adjustment (BGA), with gap dial.
- CE standard “OMERO” electric control system.
- Meet OSHA safety standard code.
- Shadow line for accurate straight cutting.
- Adjustable cutting length and stroke.
- Ball transfer plates on worktable for easy loading workpiece.
- Well balanced and sturdy all steel machine frame.
- German made Hydraulic logic system centrally located and quiet.
- Hydraulic hold-downs with anti-mar neoprene.
- Shear blades are high grade carbon/chrome alloy steel and hardened to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade.
- Full length viewable safety finger guard to protect operator from cutting hazard.
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal.
- Hydraulic, electrical overload protection.
- Compact operator control panel.
- All motors are overload protected & low voltage control system.
- Jog or continuous auto cycle cutting operation modes.
Note: The minimum material thickness this Shear can handle is 20 gauge.
Specifications
| Cutting capacity: Mild Steel: Stainless Steel: | 52" x 10 Ga. 52" x 14 Ga. |
| Blade Length: | 52" |
| Strokes per Minute: | 12-20 |
| Worktable Height: | 34 1/2" |
| Front Support Arm: | 24" |
| Back Gauge (German SIKO): | 24" Powered B.G. |
| Blade Rake Angle: | 2 degrees |
| Oil Tank Capacity: | 17 Gallons |
| Main Motor: Powered B.G. Motor | 7-1/2 HP / 3 Phase / 220V/35A (Optional: 440V/18A / 3 Phase) 3/4 HP / 220v/440v / 3 Phase |
| Machine Weight: | 5,150 LBS |
| Machine Dimensions: | 74" x 86" x 63" |
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
