GMC HPB-3305 33 Ton / 5 ft CNC Press Brake - Small Hydraulic Press Brake
Features
- ISO 9001 certified.
- Meet OSHA and CE safety standard.
- Easy-to-use programmable Estun E21 control.
- Easy programming, stores 40 programs.
- Estun E21 control keep a piece count for large production run.
- Precision ball screws for 24” back gauge.
- Rexroth hydraulic system.
- Schneider electrical components.
- All steel construction for maximum rigidity.
- Hydraulic logic system centrally located and quiet.
- Safety type foot pedal with E21 screen, control panel and E-stop switch.
- Safety 24V low voltage & overload protection.
Specifications
| Maximum pressure | 33 Tons |
| Bending length capacity | 63" (5'3") |
| Distance between uprights (housing) | 51" |
| Ram Stroke travel Cylinder travel adjustment, max |
4" 2" |
| Table width | 6" |
| Distance between table and ram | 13-1/4" |
| Throat Depth | 8" |
| Back Gauge Distance | 21" |
| Back Gauge Repeatability | .008" |
| Y Axis Repeatability | .008" |
| Approach speed, inch / second | 3.5" |
| Bending speed , inch / second | 0.39" |
| Return speed , inch / second | 2.75" |
| Main motor | 5-1/2 HP, 3 Phase 25 AMP Prewired: 220VAC (+/- 10%) |
| Motor for back gauge | 1 HP, 3 Phase 220VAC (+/- 10%) |
| Motor for bending angle setting | 1/2HP, 3 Phase 220VAC, (+/- 10%) |
| Hydraulic oil tank capacity | 20 Gal. |
| Recommended Oil | Hydraulic oil Shell# 68HD |
| Machine weight | 5,350 lbs. |
| Machine size (L x W x H) | 91 x 56 x 87 in. |
| Machine shipping dimensions | 91 x 56 x 87 in. |
Standard Equipment
- Estun E21, 2 Axis Controller.
- ( 2 ) 24” front support arms.
- Quick release segmented ( American Style Tooling ) punch holder
- Full Length Gooseneck Punch HRC 50 Full Length Vee Die with 6 assorted sizes HRC 50,1”,3/4”,5/8”, 1/2”, 3/8”, 1/4”
- Lntech Light Curtain System.
- Side and Back Safety Fence.
- Movable Foot Pedal with E21 screen, control panel ,and E-stop meet OSHA safety standard.
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
