Katool KT-C9372 Brake Lathes Heavy-Duty Combination Disc/Drum
The Katool Automotive Equipment KT-C9372 Brake Lathe is a professional combination disc and drum brake lathe built for precision resurfacing in automotive service shops, brake repair facilities, and commercial garages. Designed to handle rotors, drums, and flywheels, this machine helps technicians restore braking surfaces efficiently while improving service quality and extending component life. Katool’s product listing identifies the C9372 as a 110V/220V combination disc/drum brake lathe with full accessories, built for professional shop use.
Features
- Versatile Machining Capabilities: Accommodates rotor diameters from 4" to 20" (102-508 mm) and drum diameters from 6" to 19.5" (152-500 mm), allowing for a broad range of applications.
- Adjustable Feed Rates: Infinitely adjustable feed rates enable precise control over cutting speeds, ensuring optimal finish quality for both rough cuts and fine finishes.
- Quick Changeover Design: A convenient design allows for rapid transitions between rotor and drum machining, enhancing operational efficiency.
- Automatic Stop Function: Features an automatic stop position after cutting, promoting safety and streamlining workflow.
- Available: In both 110V and 220V options.
Specifications
| Model | KT-C9372 |
| Product Type | Combination Disc / Drum Brake Lathe |
| Rotor Diameter | 4"–20" (102–508 mm) |
| Maximum Rotor Thickness | 2.85" (73 mm) |
| Drum Diameter | 6"–19.5" (152–500 mm) |
| Drum Depth | 6.5" (165 mm) |
| Flywheel Diameter | 6"–24" (152–610 mm) |
| Spindle Capacity | 150 lbs (68 kg) |
| Spindle Speed | 70–320 RPM |
| Feed Rate (Rotor/Drum) | 0"–0.026" (0–0.66 mm) |
| Feed Rate Per Minute | 2.54" (64.5 mm) |
| Motor | 110V / 220V, 50/60Hz |
| Dimensions | 43.3" × 28.7" × 28.3" (1100 × 730 × 720 mm) |
| Shipping Weight | 661.3 lbs (300 kg) |
Warranty Policy
We offer a limited one-year (12 months) warranty on all parts and against all product defects, free of charge to our customers, on all equipment.
A 2-year extended warranty plan may be purchased for any piece of Katool or M&E automotive equipment (Contact us for more info)
* Including but not limited to: Cylinders, power units, motors, displays, electronics, etc...
Vehicle lifts will include an additional three-year (36 months) warranty on all lift structural components only.
Warranty claim for all products must fall within above period in order to qualify for limited warranty. Warranty is non-transferable, must have original order number, and purchased from our company or a registered vendor. Replacement Parts will be provided at no cost to the customer and will include free shipping.
*All warranty claims submitted to KATOOL are subject to approval by the warranty/service department and may be approved or denied at the full discretion of these departments. Photos and/or videos of original defects may be requested. Customers should not disassemble any piece of equipment before proof of original problem/issue has been determined. Any equipment outside of the policy will not be covered and buyer will be responsible for purchasing replacement parts at full cost and shipping charges will apply. Labor is not included in warranty.
- Free Shipping:
- Yes
CALL US NOW
