JET Tools GH-1880ZX Lathe With Newall DP700 DRO With Collet Closer
The ZX-Series Large Spindle Bore Lathe provides power, precision, efficiency and reliability to your metal shop. A one piece cast iron base absorbs vibrations during operation to allow heavier cuts and ensure accuracy, while the Universal Gearbox eliminates the need to change gears.
Features
- 3-1/8” bore spindle is supported by two tapered and one ball bearings.
- Chrome molybdenum headstock gears are hardened, ground and shaved.
- Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required.
- Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces.
- T-slotted compound slide featuring four-way tool post.
- One piece cast iron base absorbs vibration allowing heavier cuts.
- High quality ANSI Class 50 wear resistant cast iron bed ways are.
- Removable gap allows large diameter work.
- Five position automatic carriage stop increases productivity.
- Meehanite Castings.
- Siemens Electrics.
- 10” 3-jaw scroll chuck with top reversing jaws.
- 12” face plate.
- 5pc. Quick change tool post set.
- Follow rest.
- Large capacity steady rest with ball bearing tips.
- Fully integrated coolant system.
- Full length splash guard and coolant return.
- Large easy to use foot brake.
- Articulating LED work lamp.
- Electronic Chuck Key Holder.
- Fitted top mats to hold tooling.
- Centrally located controls with jog button.
- Threading dial.
- Mounting pads and levelers.
- Live center.
- Tolerance Test Certificate.
- Tool box and adjusting tools.
- E-Stop on Carriage for added safety.
Specifications
| Stock Number | JT-321583 |
| Carriage Travel (In.) | 74-5/16 |
| Compound Slide Travel (In.) | 5-1/8 |
| Cross Slide Travel (In.) | 9 |
| Drive | Geared Head |
| Length of Gap (In.) | 12 |
| Max Tool Size (In.) | 1 x 1 |
| Model Number | GH-1880ZX |
| Motor (HP) | 7-1/2 HP, 230/460, 3 Ph |
| Number of Inch Threads | 61 |
| Number of Longitudinal and Cross Feed Rates | 46/31 |
| Number of Metric Threads | 24 |
| Number of Spindle Speeds | 12 |
| Overall Dimensions (L x W x H) (In.) | 136 x 44 x 66 |
| Range of Cross Feeds (IPR) | .0006 - .0360 |
| Range of Inch Threads (TPI) | 1-5/8 - 72 |
| Range of Longitudinal Feeds (IPR) | .0015 - .0900 |
| Range of Metric Threads | .05 - 20 |
| Range of Spindle Speeds (RPM) | 25 - 1,800 |
| Size | 18 x 80 |
| Spindle Bore (In.) | 3-1/8 |
| Spindle Mount | D1-8 |
| Spindle Taper with Sleeve | MT-7 (MT-5) |
| Steady Rest Capacity (In.) | 3/8 - 7-3/4 |
| Style (Type) | Engine - Large Spindle Bore |
| Swing Over Bed (In.) | 18 |
| Swing Over Cross Slide (In.) | 11 |
| Swing Through Gap (In.) | 27-1/2 |
| Tailstock Spindle Travel (In.) | 5 |
| Taper in Tailstock Spindle | MT-5 |
| Weight (Lbs.) | 6590 |
| Width of Bed (In.) | 13-1/8 |
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
