Dent Fix Equipment DF-900B Aluspot Aluminum Repair Station - Mini
The DF-900B Mini Aluspot Repair System from Dent Fix Equipment is designed to operate as the main unit or as satellite unit.
The Aluspot Mini utilizes some of the same Dent Fix innovations and premier equipment as the larger Aluspot systems but at a fraction of the price.
Now, any shop can invest in the future and start repairing minor to moderately damaged aluminum panels.
The DF-900B Mini Aluspot kit includes:
- an aluminum specific stud welder with the ground integrated on the gun
- Spitznagel Design self-locking stud pull fingers
- two kinds of alu-studs
- leverage puller
- t-puller
- metal bar for crease pulling
- 2 kinds of brushes with metal bristles
- stud cut pliers
- a mobile storage cart with electrical power strip
- consumable storage case
- twist-on eyelets
- safety glasses
- dust cover
Although the kit includes all the basics a shop will need to start repairing aluminum, shops can purchase additional pieces separately to expand their aluminum repair capabilities.
WARRANTY POLICY
Used Product Warranty Claims: A product is considered used when it has been used for more than 1 week and is no longer re-sellable. All used product warranty claims are to be returned to Dent Fix freight pre-paid. All used product will be repaired or replaced and returned to you via regular freight pre-paid. Expedited return shipments are sent freight collect. Whether to repair or replace is at our sole discretion.
Air Tools: All our air tools carry a 1-year warranty against manufacturing defects. Customer abuse, such as a lack of proper maintenance, and the damage caused therein is not covered under warranty.
?
Consumable: Any item that by its nature or design that wears, gets used up or is permanently changed by its usage is considered a consumable item. Drill bits are a consumable item and as such carry no warranties expressed or implied. There are several procedures the user can implement in order to extend drill bit life, but ultimately the drill bit will break or dull. It is up to the technician to ensure proper usage.
Items with Specific Warranties:
DF-1 Stud Welder: Lifetime – Chuck of slide hammer & Transformer. 5 year – Trigger switch.
DF-505 “The Maxi”: 5 years on internal components.
DF-601 Surge Protector: Lifetime – return for replacement if red L.E.D. does not light.
DF-900W Aluspot Stud Welder: 5 Years - Internal components.
DF-SPR67 Self-Piercing Riveter: 1 Year - Internal components.
DF-EZN1 & DF-EZN1G EZ Nitrogen Welders - 5 Years - Internal components.
Other warranties may apply, please check your product sheet for more information. This warranty does not apply where: repairs have been made or attempted without the assistance of or by an authorized Dent Fix Repair Center; repairs are required because of normal wear and tear; the tool has been abused or misused or improperly maintained; alterations have been made to the tool.
In no event shall DENT FIX be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of the warranty.
DENT FIX disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose”, after the term of this warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
?
QUESTIONS PLEASE CALL 800-562-4791
