Challenger Lifts CL10-XP9-3 9,000 Lbs. Drive On Style Two Post Lifts W/ 3' Extensions
CL10XP9 Two Post Lift Series
Challenger’s 9,000 lb. capacity CL10XP9 2-post lift offers a drive-on pad for the quickest vehicle spotting designed for express bays. Accurate first-try spotting will boost your productivity as well as reduce frustration in your shop. Quick Cycle™ models improve lifting speed to just 27 seconds rise and 17 seconds lower. Also, adjustable height and width options are available, making the CL10-XP9 the best choice for any service professional. Expand your service potential with our most versatile, easy-to-operate lift.
Features
- 3 feet long extensions
- 9,000 lb. lift capacity
- Drive-on style pad aids in quick vehicle spotting for express bays
- Low-profile pad design minimizes vehicle clearance issues
- Reinforced front and rear access ramps are designed to easily flip up and lock to extend the platform length to accommodate longer wheelbase vehicles
- Standard column mounted spotting block storage caddy helps keep a safe and clean work environment
- 48″ elongated carriage design increases lift life
- Oversized 5″ diameter pulley and heavy duty 5/16″ cable reduces stress on equalization system and increases cable life
- Padded overhead shut off system prevents vehicle damage
- Fully gusseted base plate design increases column rigidity
- Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
- Premium powder coat finish provides long-lasting durability
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
Specifications
Model Number | CL10-XP9-3 |
Lifting Capacity | 9,000 lbs. |
Lifting Configuration | Drive-on express pad |
Rise Height | 70” |
Overall Height | 140” |
Overall Height (Cylinder Extended) | 143” |
3’ Height Extension Available | Yes |
Overall Width | 138.5” |
Drive-Thru Clearance | 90” |
Floor to Overhead Switch | 134.5” |
Platform Height | 2.25“ |
Platform Width | 24” |
Platform Length | 58” / 66.5” / 75” |
Width Between Platforms | 31.5“ |
Inside of Columns | 110” |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
Speed of Rise | 38 s |
Ceiling Height Required | 12’ |
ALI/ETL Certified | Yes |
Featuring Quick Cycle | - |
Featuring Dual Pendant Controls | - |
Colors Available | Red, Blue, Black |
Additional Parts and Accessories
Productivity Accessories | |
Part No. | Description |
B10264A | Air/electric workstation with filter/lubricator/regulator |
B99700 | Tire Tool Manager Work Station with filter/lubricator/regulator |
Power Upgrades | |
Part No. | Description |
3PH217 | Power Unit Upgrade to 3-Phase - 208V |
3PH239 | Power Unit Upgrade to 3-Phase - 230V |
3PH469 | Power Unit Upgrade to 3-Phase - 460V |
Download
Other Models
Model Number | CL10-XP9 | CL10-XP9-DPC | CL10-XP9-QC | CL10-XP9-DPC-QC |
Lifting Capacity | 9,000 lbs. | 9,000 lbs. | 9,000 lbs. | 9,000 lbs. |
Lifting Configuration | Drive-on express pad | Drive-on express pad | Drive-on express pad | Drive-on express pad |
Rise Height | 70” | 70” | 70” | 70” |
Overall Height | 140” | 140” | 140” | 140” |
Overall Height (Cylinder Extended) | 143” | 143” | 143” | 143” |
2’ Height Extension Available | Yes | Yes | Yes | Yes |
3’ Height Extension Available | Yes | Yes | Yes | Yes |
Overall Width | 138.5” | 138.5” | 138.5” | 138.5” |
Drive-Thru Clearance | 90” | 90” | 90” | 90” |
Floor to Overhead Switch | 134.5” | 134.5” | 134.5” | 134.5” |
Platform Height | 2.25“ | 2.25“ | 2.25“ | 2.25“ |
Platform Width | 24” | 24” | 24” | 24” |
Platform Length | 58” / 66.5” / 75” | 58” / 66.5” / 75” | 58” / 66.5” / 75” | 58” / 66.5” / 75” |
Width Between Platforms | 31.5“ | 31.5“ | 31.5“ | 31.5“ |
Inside of Columns | 110” | 110” | 110” | 110” |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph | 3HP, 208v-230v, 60Hz, 1Ph | 3HP, 208v-230v, 60Hz, 1Ph |
Speed of Rise | 38 s | 38 s | 27 s | 27 s |
Ceiling Height Required | 12’ | 12’ | 12’ | 12’ |
ALI/ETL Certified | Yes | Yes | Yes | Yes |
Featuring Quick Cycle | - | - | Yes | Yes |
Featuring Dual Pendant Controls | - | Yes | - | Yes |
Colors Available | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black | Red, Blue, Black |
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
Accessories | 90 days | No | |||
Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.