BendPak PL6000DC 6,000 Lb. Capacity, Shared Columns Two-Post Parking Lift (SPECIAL ORDER)

BendPak

SKU:
BP-5175427
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
  • Ranger RJS-1T 1,650-Lb.High Reach Jack Stand
  • Ranger RD-9G 9-Gallon Upright Portable Oil Drain
  • Bendpak WSA-100 Optional Air-Electric Workstation, Fits 2-Post & 4-Post Lifts
Total Price:
MSRP: $8,994.00
$7,495.00
(You save  $1,499.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendPak PL6000DC 6,000 Lb. Capacity, Shared Columns Two-Post Parking Lift (Special Order)

The PL-6000DC is a two-post parking lift with car storage capacity of up to 6,000-pounds. This parking lift is designed to be ganged together with shared columns allowing you to fit more units into a smaller space. Can be installed in either indoor or outdoor locations.

The PL-6000DC dual-column parking lift is designed to accommodate a wide array of vehicles including SUVs, sedans, and sports cars. It offers the perfect combination for both long-term and short-term parking. Typically long-term parking is the upper level and short-term parking below. The PL-6000DC was specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. The PL-6000DC can be installed inside a typical 8-foot parking space and accommodate most cars and light trucks. They operate in both indoor and outdoor locations.

Multiple Lift Installations

Multiple Lifts may be installed side-by-side, sharing a Post. Refer to item 5175439 for more info.

Features

  • Ganged column design allows multiple installations in minimum space.
  • Commercial grade design and construction.
  • Galvanized and corrugated anti-slip platform.
  • Freestanding design when ganged two or wide.
  • Overhead power unit provides smooth quiet hydraulic operation.
  • Designed for installation on typical parking surfaces.
  • Platform can be stopped at different heights to fit various vehicles and ceiling heights.
  • Full width channel-locked center panels protect lower vehicle.
  • Wide deck platform accommodates pickups, vans and cars.
  • Dual direct-drive hydraulic cylinders.
  • Automatic safety lock combined with anti-fall device hold platform securely.
  • Maintenance free composite carriage bearings.
  • Electric key switch for security and safety.
  • Automatic shut-off when operator releases key switch.
  • Manual lock release available in case electricity failure (OPTIONAL).
  • Hydraulic overloading protection.
  • Photocell sensor prohibits lift to be lowered if vehicle is parked below.

Specifications

 Model  PL-6000DC
 Lifting capacity per Platform  6,000 lbs. / 2,700 kg
 a Total width, outside edge to outside edge  100.25 in. / 2,547mm
 b Lift Platform Length  157 in. / 3,990 mm
 c Post height  131 in. / 3,320 mm
 d Post, center to center width  93.75 in. / 2,381 mm
 e Post Support Length  60.3 in. / 1,532 mm
 f Lifting height  82.5 in. / 2,100 mm
 g Control Column Height  71 in. / 1,805 mm
 h Lift Platform Usable Width  82.5 in. / 2,100 mm
 i Side Clearance min.  2 in. / 50.75 mm
 j Platform Length Behind Chain Roller  32.25 in. / 819 mm
 k Post Support Edge to Approach  64.5 in. / 1,639 mm
 Lifting Time  <50 Seconds
 Motor  220 VAC, 50/60 Hz, 1 Ph
 Operating Temperature and Humidity  +41° to +104°F / +5° to +40°C 50% RH
 
 
 
2024-04-15-16-13-01-pl-6000dc-parking-lift-installation-and-operation-manual.png

 

Downloads

pdf.jpg Manual

pdf.jpg Specs Sheet

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.