Bendpak RBJ18000 18000 Lbs Rolling Bridge Jack
The powerful 18,000-lb. capacity RBJ18000 rolling bridge jack is made for use with your HDS35 or HDS40 4-Post series lift. Sometimes a vehicle’s center of gravity that isn’t in the exact middle of the vehicle.
Features
- 18,000-lb. lifting capacity.
- Steal contact pads.
- High-pressure hydraulic power unit.
- Optional air-line kit.
Specifications
| RBJ18000 Specifications | |
| Lifting Capacity | 18,000 lbs. (8,165 kg) |
| Suitable Lift Model(s) | HDS-40 Series |
| Min. Drive-Over Height* | |
| Short Arm Pad | 9" (229 mm) |
| Short Top Pad | 9.75" (248 mm) |
| Tall Arm Pad | 10.5" (267 mm) |
| Tall Top Pad | 11.25" (286 mm) |
| Max. Lifting Height* | |
| Short Arm Pad | 19" (483 mm) |
| Short Top Pad | 19.75" (502 mm) |
| Tall Arm Pad | 20.5" (521 mm) |
| Tall Top Pad | 21.25" (540 mm) |
| Reach | |
| Support Base Width | 45" (1,143 mm) |
| Max. Arm Pad Reach | 63.75" (1,619 mm) |
| Min. Arm Pad Reach | 48.5" (1,232 mm) |
| Max. Top Pad Reach | 39.5" (1,003 mm) |
| Min. Top Pad Reach | 8" (203 mm) |
| Time to Full Rise | 55 seconds |
| Pump | Air/Hydraulic |
| Air Pressure | 125 PSI (10-25 CFM) |
| Max. Operating Hydraulic Pressure | 7,200 PSI |
| Power Requirement | None |
| Shipping Weight | 792 lbs. (359 kg) |
| Shipping Dimensions | 47" x 29" x 17" (1,206 mm x 736 mm x 431 mm) |
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Downloads
