Bendpak HD-9XW 9,000-Lb. Capacity Standard Width, Extra-Tall Car Lift

$4,235.00
$4,235.00
$3,540.00
(You save $695.00 )
Brand:
SKU:
5175863
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
  • Bendpak JP-3 3,000-Lb. Capacity Sliding Jack Platform For Runway
  • Bendpak Plastic Drip Trays Sets Of Two
  • Bendpak RBJ4500 4,500 Lb. Capacity, Rolling Bridge Jack
  • Bendpak DP-30 18 Gallon Rolling Drain Pan
  • Bendpak Caster Kit Portable Wheel Kit For HD-7 & HD-9 Series

Bendpak HD-9XW 9,000-lb. Capacity Standard Width, Extra-Tall Lift

We’re proud to be able to say the HD-9XW four-post lift is one of our most versatile and user-friendly lifts for serious DIY’ers and shop owners. The extra ceiling clearance you need means this car lift is generally the property of daily wrenchers with dedicated service garages, and the standard-size width is ideal for most normal garage environments.

Bendpak Leak Proof Will it Fit? Bendpak HD-9SW Floorplan

Safe Balancing Bendpak Car Lift Guide Bendpak Top 10 Car Lift Buyer's Guide

Features:

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • High-rise
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric-hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles available
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

qp.jpg 

Specifications:

 Capacity

  • Lifting Capacity* 9,000 lbs. (4,082 kg)
  • *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
  • *Max Capacity / Rear Axle 4,500 lbs. (2,041 kg) 

Rise

  • A - Min. Runway Height: 4.5" (114 mm)
  • B - Max. Rise: 82" (2,083 mm)
  • C - Max. Lifting Height: 86.5" (2,197 mm)
  • Time to Full Rise: 50 seconds 

Outside Dimensions

  • D - Overall Width: 110.25" (2,800 mm)
  • E - Outside Length: 198" (5,029 mm)
  • F - Overall Length: 224" (5,690 mm)
  • G - Height of Columns: 100" (2,540 mm)

Inside Dimensions

  • H - Width Between Columns: 100.25" (2,546 mm)
  • I - Drive-Thru Clearance: 86.5" (2,197 mm) 

Runways

  • J - Runway Width: 19" (483 mm)
  • K - Length of Runways: 188" (4,775 mm)
  • L - Width Between Runways: 37.5" (953 mm) or 44.375" (1,127 mm)
  • M - Runway Centerline: 56.5" (1,435 mm) or 63.375" (1,610 mm)
  • N - Outside Edge of Runways: 75.5" (1,918 mm) or 82.375" (2,092 mm) 

Minimum Wheelbase

  • Rated Capacity: 135" (3,429 mm)
  • 75% Capacity: 115" (2,921 mm)
  • 50% Capacity: 95" (2,413 mm)
  • 25% Capacity: 80" (2,032 mm)

Locking

  • Locking Positions: 15
  • Lock Spacing: Every 4" / 102 mm

Power Unit

  • Motor: 220 VAC / 60 Hz. 1Ph.
  • Noise: 45 dB 

Shipping

  • Weight: 2,040
  • Dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

ACCESSORIES:

Bendpak WSA-100     Bendpak Air Bottle jack     Bendpak Plastic Drip Trays     Bendpak Rolling Jack 4,500     Bendpak JP-6
          WSA-100                       AIR BOTTLE JACK          PLASTIC DRIP TRAYS             ROLLING JACKS          SLIDING JACK PLATFORM

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

****The Bendpak XPR-9XW is an ALI Certified Lift. Click here to view its certification. 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty