Bendpak HD-9SWX 9,000-Lb. Capacity Super Wide 4 Post Car Lift

$9,270.00
$9,270.00
$7,755.00
(You save $1,515.00 )
Brand:
SKU:
5175024
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
  • Bendpak RBJ4500 4,500 Lb. Capacity, Rolling Bridge Jack
  • Bendpak Plastic Drip Trays Sets Of Two

BendPak HD-9SWX 9,000-lb. Capacity Super Wide 82" Rise 4 Post Lift

The HD-9SWX super-wide four-post lift offers 82” of overhead clearance. It’s ideal for taller mechanics and home wrenchers looking for a little extra standing room. The additional height also helps you park higher-clearance vehicles for long or short-term storage

Bendpak Leak Proof Will it fit? Bendpak HD-9SWX Floorplan

Bendpak Safe Balancing Bendpak Car Lift Guide Bendpak Top Car Lift Buying Guide

FEATURES:

 

  • 9,000-lb. maximum lifting capacity
  • Freestanding design
  • Perfect for parking, storage and service
  • Double-wide configuration for quad-vehicle storage
  • Four runways
  • Super-tall rise
  • Extra-long ramp
  • Runways accommodate wide or narrow vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Oversized sheave diameter reduces cable fatigue
  • High-speed lifting
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Inside runways adjust for different tread widths
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available

h.jpgSPECIFICATIONS:

Capacity

  • Lifting Capacity* 9,000 lbs. (4,082 kg)
  • *Max Capacit ity / Rear Axle 4,500 lbs. (2,041 kg)

Rise

  • A - Min. Runway Height: 7" (178 mm)
  • B - Max. Rise: 82" (2,083 mm)
  • C - Max. Lifting Height: 89" (2,261 mm)
  • Time to Full Rise: 65 seconds

Outside Dimensions

  • D - Overall Width: 202" (5,131 mm)
  • E - Outside Length: 198" (5,029 mm)
  • F - Overall Length: 224" (5,690 mm)
  • G - Height of Columns: 102" (2,591 mm)

Inside Dimensions

  • H - Width Between Columns: 192" (4,877 mm)
  • I - Drive-Thru Clearance: 178" (4,521 mm)

Runways

  • J - Runway Width: 19" (483 mm)
  • K - Length of Runways: 188" (4,775 mm)
  • L - Width Between Runways: 37" (940 mm) or 42" (1,067 mm)
  • M - Runway Centerline: 56" (1,422 mm) or 61" (1,549 mm)
  • N - Outside Edge of Runways: 75" (1,905 mm) or 80" (2,032 mm)

Minimum Wheelbase

  • Rated Capacity: 135" (3,429 mm)
  • 75% Capacity: 115" (2,921 mm)
  • 50% Capacity: 95" (2,413 mm)
  • 25% Capacity: 80" (2,032 mm)

Locking

  • Locking Positions: 16
  • Lock Spacing: Every 4" (102 mm)

Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB

Shipping

  • Weight: 3,892 lbs. (1,769 kg)
  • Dimensions: 216" x 24" x 48" / 5,486 mm x 610 mm x 1,219 mm

ACCESSORIES: 

Bendpak WSA-100     Bendpak Air Bottle jack     Bendpak Plastic Drip Trays     Bendpak Rolling Jack 4,500     Bendpak JP-6
          WSA-100                         AIR BOTTLE JACK             PLASTIC DRIP TRAYS               ROLLING JACKS                   SLIDING JACK PLATFORM
 

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

****The Bendpak HD-9SWX is an ALI Certified Lift. Click here to view its certification. 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty