BendPak 7.5 HP / 80-Gal. V-Max Elite Air Compressor

BendPak

SKU:
BP-5179112
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Total Price:
MSRP: $5,634.00
$4,695.00
(You save  $939.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendPak 7.5 HP / 80-Gal. V-Max Elite Air Compressor

VMP-7580V-601 V-Max Patriot Air Compressor / 7.5 HP, 1 Ph / 80-Gallon Vertical Tank 

The V-Max Patriot 7580V-601 air compressor combines leading-edge technology with the superior build quality you've come to expect from the world leader in automotive service equipment. Featuring an 80-Gallon vertical tank and 7.5 HP low-RPM motor, you're ready for all your compressed air needs. Assembled in USA.

Unlock your shop's full potential with the V-Max Patriot 7580V-601 Air Compressor. Featuring the rugged V-Max Patriot extreme-duty, four-cylinder pump design, the 7580V-601 is engineered to operate at maximum efficiency under all load conditions. This rugged, two-stage, lubricated reciprocating air compressor with 100% cast-iron pumps will provide the quality and performance required for every air-intensive application—from automotive and body repair to manufacturing and industrial service. Assembled in the USA.

Features

  • UL, CSA, ASME certified.
  • 7.5 HP energy-efficient motor.
  • Extra-quiet, low-RPM pump.
  • Cast-iron ​V-Max Patriot pump features simple splash lubrication for total reliability and a "V-4" finned cylinder configuration that provides 360° cooling.
  • Proven air-cooled design is economical, reliable and environmentally friendly.
  • Two compression rings and one oil control ring provide excellent oil control and high-efficiency air delivery.
  • Dual drive belts require less belt tension, resulting in less load on pump bearings, longer belt life and low vibration.
  • Fully-enclosed belt guard.
  • Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed-in sleeves.
  • Anti-vibration pads included.
  • Large surface area and cooling fins on cylinders and forced-air after-cooler provide efficient heat dissipation for lower operating temperatures and dryer air. Air compressor runs cooler, oil life is extended and maintenance is reduced.
  • Tapered roller main bearings provide full contact and support of the crankshaft, and needle-type piston pin bearings properly distribute bearing loads.
  • Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life.
  • Magnetic starter provides thermal overload protection and minimizes start loads, providing long life and trouble‐free operation.
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator.
  • Balanced flywheel and counterbalanced crankshaft result in nearly vibration-free operation.
  • Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime.
  • Corrosion-resistant tubing for coolers, separators and valves for longer life and reduced maintenance.
  • Oversized ductile iron crankshaft provides extra strength and longer wear.
  • High-density, die-cast aluminum alloy rods minimize reciprocating weight.
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap.
  • Automatic pressure switch provides auto start and stop.
  • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start-up compression.
  • Pressure gauge with service valve.

Specifications

 Motor  
 Horsepower   7.5 HP
 RPM  1,750 RPM
 Voltage  208-230 Volt AC
 Phase  1-Phase
 Hertz  60 Hz
 Magnetic Starter  Yes
 Amp Draw  32
 Recommended Breaker  50 Amp Breaker
 Noise  78 dB
 Pump  
 Style  Two-Stage / V-4
 Pump RPM  625 RPM
 Material  Solid Cast Iron
 Duty Cycle  Continuous
 CFM  26 CFM
 CFM Rated @  175 PSI
 Max PSI  175 PSI
 Oil Sight Glass  Yes
 Pump Type  Two-Stage
 Pump Drive  Belt Drive
 Oil Type  Oil Lubricated
 Oil System  Full Pressure Lubrication
 Tank  
 Orientation  Vertical
 Size  80 gallon
 Outlet  3/4" Fitting
 Electronic Drain Valve  Yes
 Certification  UL, CSA, ASME
 Dimensions  
 Width  24" (610 mm)
 Depth  72" (1829 mm)
 Height  34" (864 mm)
 Shipping  
 Weight  936-lbs. (424 kg)
 Dimensions  48'' x 48'' x 85'' (1,219 mm x 1,219 mm x 2,159 mm)

 

Downloads

pdf.jpg  Manual

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.