BendPak 7.5 HP / 80-Gal. V-Max Elite Air Compressor

BendPak

SKU:
BP-5179113
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Total Price:
MSRP: $6,354.00
$5,295.00
(You save  $1,059.00 )
Adding to cart… The item has been added

BendPak  7.5 HP / 80-Gal. V-Max Elite Air Compressor

VMP-7580V-603 V-Max Patriot Air Compressor / 7.5 HP, 3 Ph / 80-Gallon Vertical Tank 

Up your air game with the powerful, 3-phase V-Max Patriot 7580V-603 air compressor from BendPak. V-Max Patriot air compressors meet and exceed your air system needs with high-efficiency technology and unrivaled quality. Assembled in USA.

Meet the V-Max Patriot 7580V-603, 3-phase air system. Like every member of the V-Max Patriot family, the 7580V-603 features the rugged V-Max, four-cylinder pump designed for extreme duty and maximum efficiency under all load conditions. ​The BendPak 7580V-603 is a 2-stage lubricated reciprocating air compressor built with 100% cast-iron pumps to provide the quality and performance required by heavy-use applications like automotive/body repair shops and industrial manufacturing and fleet services.

Features

  • UL, CSA, ASME certified.
  • 7.5 HP energy-efficient motor.
  • Extra-quiet, low-RPM pump.
  • Cast-iron V-Max ​Patriot pump features simple splash lubrication for total reliability and a "V-4" finned cylinder configuration that provides 360° cooling.
  • Proven air-cooled design is economical, reliable and environmentally friendly.
  • Two compression rings and one oil control ring provide excellent oil control and high-efficiency air delivery.
  • Dual drive belts require less belt tension, resulting in less load on pump bearings, longer belt life and low vibration.
  • Fully-enclosed belt guard.
  • Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed-in sleeves.
  • Anti-vibration pads included.
  • Large surface area and cooling fins on cylinders and forced-air after-cooler provide efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced.
  • Tapered roller main bearings provide full contact and support of the crankshaft, and needle-type piston pin bearings properly distribute bearing loads.
  • Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life.
  • Magnetic starter provides thermal overload protection and minimizes start loads, providing long life and trouble‐free operation.
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator.
  • Balanced flywheel and counterbalanced crankshaft result in nearly vibration-free operation.
  • Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime.
  • Corrosion-resistant tubing for coolers, separators and valves for longer life and reduced maintenance.
  • Oversized ductile iron crankshaft provides extra strength and longer wear.
  • High-density, die-cast aluminum alloy rods minimize reciprocating weight.
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap.
  • Automatic pressure switch provides auto start and stop.
  • Integrated pressure unloader valves are built into the intake valve assembly on the air compressor head, reducing internal pump heat from initial start-up compression.
  • Pressure gauge with service valve.
  • Oversize replaceable air filters.

Specifications

 Motor  
 Horsepower  7.5 HP
 RPM  1,750 RPM
 Voltage  208-230 Volt AC
 Phase  3-Phase
 Hertz  60 Hz
 Magnetic Starter  Yes
 Amp Draw  18
 Recommended Breaker  50 Amp Breaker
 Noise  78 dB
 Pump  
 Style  Two-Stage / V-4
 Pump RPM  625 RPM
 Material  Solid Cast Iron
 Duty Cycle  Continuous
 CFM  26 CFM
 CFM Rated @  175 PSI
 Max PSI  175 PSI
 Oil Sight Glass  Yes
 Pump Type  Two-Stage
 Pump Drive  Belt Drive
 Oil Type  Oil Lubricated
 Oil System  Full Pressure Lubrication
 Tank  
 Orientation  Vertical
 Size  80 gallon
 Outlet  3/4" Fitting
 Electronic Drain Valve  Yes
 Certification  UL, CSA, ASME
 Dimensions  
 Width  24" (610 mm)
 Depth  72" (1829 mm)
 Height  34" (864 mm)
 Shipping  
 Weight  880-lbs. (399 kg)
 Dimensions  45'' x 40'' x 78'' (1,143 mm x 1,016 mm x 1,981 mm)

 

Downloads

pdf.jpg  Manual

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.