BendPak 16AP-192 16,000 Lbs Clearfloor 2-Post Lift (High Rise)

BendPak 16AP-192 16,000 Lbs Clearfloor 2-Post Lift (High Rise)

The 16AP-192 two-post lift delivers exceptional direct-drive lifting performance. Equipped with cutting-edge technology, top-of-the-line materials, and a design that’s ahead of its time, the 16AP is what you’ll want when you’re working on vehicles weighing up to 16,000 lbs.

Features

• Durable powder coat finish.
• Expandable top beam accommodates wide or narrow drive-thru.
• configurations.
• Double-telescoping screw pads offer increased versatility.
• Padded overhead safety shutoff bar.
• Single-point safety release.
• Drop-end arms provide a lower pad height.
• Dual hydraulic direct-drive cylinders.
• Electric / hydraulic HVLP power system.
• Self-lubricating dura-glide UHMW polyethylene bearing system.
• Automatic arm restraints withstand over 2000-pounds of side force.
• Oversized cable sheave diameter reduces cable fatigue.
• ALI Certified.

Specifications

Model  16AP-192  Max. Lifting capacity  16,000 lbs. / 7,257 kg  A – Underlock Clearance  76 in. / 1,930 mm  B1 – Max. Lifting Height (Top Lock)  82.25 in. / 2,089 mm  B2 – Max Rise  82.75 in. / 2,102 mm  C – Max. Lifting Height w/ Adapters  89.75 in. / 2,280 mm  D – Min. Height w/ Pad  7.75 in. / 195 mm  E – Overall Height  193 in. / 4,904 mm  F – Overall Width  168 in. / 4,267 mm  G – Width, Outside Posts  149 in. / 3,785 mm  H – Width, Inside Posts  126 in. / 3,199 mm  I – Width, Drive-Thru  107.75 in. / 2,740 mm  J – Floor to Top Switch  186.5 in. 4,738 mm  K – Lift Arm Reach  36 in. / 931 mm (min)  65 in. / 1,651 mm (max)  L – Base Plate Width  28 in. / 710 mm  M – Post to Base Plate  9.5 in. / 241 mm  Max. load per Lift Arm  4,000 lbs. / 2,268 kg   Motor  220 VAC, 60 Hz, 1 Phase  Sound  <70 dB

*Specifications subject to change without notice

WARNING: California Prop 65

Downloads

 Manual

 Brochure

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.