iDEAL PSB-PMR1088-AK Mixing Room
The iDEAL Paint Mixing Room is designed to provide superior lighting with a clean & controlled ventilated work area for safe paint mixing applications. Air flows through the ceiling intake filters towards one end of the room and downward into the filtered exhaust plenum and is discharged upwards through exhaust fan & ducting. This unique design allows for differ installation configurations, as the personnel door can be placed in either the front or side of the mixing room. The fan & plenum chamber are purposely located outside of mixing room to provide lower decibel levels while working inside. The included bright white powder-coat finish, deluxe control panel, premium filters & high-quality tube-axial exhaust fan.
Features
- TYPICALLY SHIPs WITHIN 48 HOURS!
- Commercial grade design for optimal air flow & lighting coverage
- DELUXE CONTROL PANEL included
- Bright White Powder Coat panel Finish – (inside & outside)
- Optional door placement to side or front of room
- ‘Pre-Hung’ 36”W PERSONNEL DOOR W/ VIEWING WINDOW
- Heavy duty precision punched 18 Gauge panel construction
- Convenient 5/16” bolt & serrated lock nut ASSEMBLY
- UL Listed Dayton 12” tube-axial exhaust fan w/ spark resistant fan blades
- NEMA rated 1/2HP-3 Phase – 230/460VAC-60Hz motor standard
- Premium AFC intake & exhaust filters
- LDPI Industrial Light Fixtures w/ Inside Access Hinged Glass Door
- (2ea) LDPI Industrial (Cls1 / Div 2) Light fixtures – UL & ETL (GROUPS A, B, C & D.)
- True ‘daylight color’ w/ GE t8 48” florescent lamps 32W – 2900 lumens, 5000K
- Optimal air flow w/ CFM 1,429 @ .5 static pressure
- Inside Dimensions: 10″ L X 8′ W X 8″ H
- All assembly HARDWARE, MANOMETER & SEALANT included
- Meets and/or exceeds all applicable OSHA & NFPA 33 regulations
- Easy to install, operate & maintain
- Optional: 1PH electrical & PSB-13DUCTKIT-8 KIT ASY (Sold Separately)
Specifications
| Paint Booth Model | PSB-PMR1088-AK |
| Inside Dimensions | 10’L X 8’W X 8’H or 8’L X 10’W X 8’H |
| Outside Dimensions | 12′-6″L X 8’-4″W X 9’-4″H or 8’-4”L X 12’-6”W X 9’-4”H |
| Fan / Motor | (1ea) – 12″ Tube Axial Fan 1/2 HP-3PH-208-230/460VAC-60HZ Non-Spark, UL Listed, NEMA Rated |
| CFM | 1,429 @ .5 Static Pressure |
| Light Fixtures | (2ea) 48” 32W, T8 / 4 Bulb Light Fixtures
UL & ETL Listed Cls1, Div2 – Groups A, B, C & D |
| Lamps | (8ea) T8 Florescent, 32W, 5000K – 48”L |
| Options | Single Phase Electrical Configuration |
| 8′ Exhaust Duct Kit (13″ Diameter) |
Downloads
TUXEDO DISTRIBUTORS LIMITED WARRANTY
Structural Warranty:
The following parts and structural components carry a five year warranty:
Columns, Arms, Uprights, Swivel Pins
Legs, Carriages, Overhead Beam
Tracks, Cross Rails, Top Rail Beam
Limited One-Year Warranty:
Tuxedo Distributors, LLC (Tuxedo) offers a limited one-year warranty to the original purchaser of Lifts and Wheel Service equipment in the United States and Canada. Tuxedo will replace, without charge, any part found defective in materials orworkmanship under normal use, for a period of one year after purchase. The purchaser is responsible for all shipping charges. This warranty does not apply to equipment that has been improperly installed or altered or that has not beenoperated or maintained according to specifications.
Other Limitations:
This warranty does not cover:
1. Parts needed for normal maintenance
2. Wear parts, including but not limited to cables, slider blocks, chains, rubber pads and pulleys
3. Replacement of lift and tire changer cylinders after the first 30 days. A seal kit and installation instructions will be sent for repairs thereafter.
4. On-site labor
Upon receipt, the customer must visually inspect the equipment for any potential freight damage before signing clear on the shipping receipt. Freight damage is not considered a warranty issue and therefore must be noted for any potential recovery with the shipping company.
The customer is required to notify Tuxedo of any missing parts within 72 hours. Timely notification must be received to becovered under warranty.
Tuxedo will replace any defective part under warranty at no charge as soon as such parts become available from the manufacturer. No guarantee is given as to the immediate availability of replacement parts.
Tuxedo reserves the right to make improvements and/or design changes to its lifts without any obligation to previously sold, assembled or fabricated equipment.
There is no other express warranty on the Tuxedo lifts and this warranty is exclusive of and in lieu of all other warranties,expressed or implied, including all warranties of merchantability and fitness for a particular purpose.
To the fullest extent allowed by law, Tuxedo shall not be liable for loss of use, cost of cover, lost profits, inconvenience,lost time, commercial loss or other incidental or consequential damages.
This Limited Warranty is granted to the original purchaser only and is not transferable or assignable.
Some states do not allow exclusion or limitation of consequential damages or how long an implied warranty lasts, so the above limitations and exclusions may not apply. This warranty gives you specific legal rights and you may have other rights, which may vary from state to state.
