Autel AULS12ALOR1T ADAS Bay Max 12K Lift
The Autel ADAS 12K Scissor Lift is a 12,000 lbs. capacity, flush-mounted specially designed alignment lift with Floor Lift Table that enables all ADAS calibrations to be performed within bay space.
Features
- 12,000 lbs. Lifting Capacity.
- Flush Mounted Hydraulic Alignment Scissor Lift.
- Specially Designed to Give More Usable Floor Space & Perform ADAS Calibrations.
- Exclusive Convenient Jack Storage Floor Lift Table.
- 185" Long x 26" Double Wide Space Saving Runways.
- Stainless Steel Front Radius Plates and Rear Slip Plates.
- Turn Plate Pocket Protectors for Paint Protection.
- Front and Rear-Opening Runways with Flip Down Wheel Stops.
- Stainless Steel Air Lock Release.
- Built-in Runway Air Tire Inflation Kit at Each Wheel.
- Low Angle Approach Ramps for Easy Access.
- Shatterproof 24" LED Light Kits with Automatic Shutoff.
- Enclosed Console Control Power Unit.
- Premium Double Baked Powder Coating Finish.
- Krown Industrial-Grade Rust Proofing.
- Includes (2) 6,000 lbs. Capacity Jacking Beams.
- Made in North America.
- ALI Certified.
Specifications
| Capacity | 12,000 lbs / 5.4T |
| Overall Length | 242-3/4″ / 6166mm |
| Deck Length | 185″ / 4700mm |
| Overall Width | 91-1/2″ / 2324mm |
| Width Between Runways | 41″ / 1041mm |
| Deck Width | 23″ / 584 mm |
| Lowered Height | 10-3/4″ / 273mm |
| Raised Height | 74″ / 1880 mm |
| Minimum 4 Wheel Alignment Wheelbase | 84″ / 2234mm |
| Maximum 4 Wheel Alignment Wheelbase | 160″ / 4064mm |
| Maximum 2 Wheel Alignment Wheelbase | 160″ / 4064mm |
| Maximum Service Wheelbase | 167″ / 4242mm |
| Lift Time | 58 Seconds |
| Power Requirements | 230 Volts AC – 60 Hz – 1 PH – 25amp |
| Shipping Weight | 5,890 lb. / 2.7T |
Downloads
Warranty Information
One Year Warranty
Autel warrants to its customers that this product will be free from all defects in materials and workmanship for a period of one(1)year from the date of the original purchase,subject to the following terms and conditions:
1. The sole responsibility of Autel under the Warranty is limited to either the repair or,at the option of Autel,replacement of the scan tool at no charge with Proof of Purchase.The sales receipt may be used for this purpose.
2. This warranty does not apply to damages caused by improper use,accident,flood,lightning,or if the product was altered or repaired by anyone other than the Manufacturer Service Center.
3. Autel shall not be liable for any incidental or consequential damages arising from the use,misuse,or mounting of the scan tool.Some states do not allow limitations on how long an implied warranty lasts,so the above limitations may not apply to you.
4. All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness.Autel reserves the right to make changes at any time without notice.
One year warranty: Store or dealer receipt acts as proof of purchase.In lieu of proof of purchase,tool or tablet is warranted one year from tool/tablet registration.
Repair Cost: If under warranty,your Autel tool will be repaired or replaced free of charge unless damaged(including but not limited to a cracked screen,broken case,chemical exposure or liquid damage)to accident,abuse,misuse,natural disaster,insufficient or excessive electrical supply,abnormal mechanical or environmental conditions or unauthorized disassembly,repair or modification.If the repaired unit is out of warranty,the customer will be contacted and will be responsible for the repair fee.
