Welding Accessories

Dent Fix Equipment DF-503T Trigger Switch for Maxi & Hammerhead The DF-503T trigger switch is a replacement part for the Maxi DF-505/220V or Hammerhead DF-595ii. Includes one (1) piece.   WARNING: California Prop 65

Dent Fix Equipment DF-1667 6.7Mm Boron Killer Drill Bit - 6.7 x 80mm The DF-1667 Boron Killer, the ONLY way to drill through Boron Steel is with this bit. This drill bit was created to specifically cut spot welds from Boron Steel. Ultra High Strength...

Dent Fix Equipment DF-1480 High Speed Cobalt Drill Bit - 8 x 45 mm *Underlined products are sold separately The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the...

Dent Fix Equipment DF-EZTAB EZ Tab Plastic Tab Repair Kit The Plastic Tab Repair Kit assists in performing fast, strong slot tab repairs on plastic parts. Choose from a set of 5 different sized slot dies, ranging in size from ¼” (6mm) to...

Dent Fix Equipment DF-1465 High Speed Cobalt Drill Bit - 6.5 x 45mm The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8.0mm and has a flat spot on it to be...

Dent Fix Equipment DF-508 Wiggle Wire - Thin 1/2 lb For crease pulling and other similar tasks. DF-508: 1/2 Lb thin Wiggle Wire .062, 1/16", 16 gauge, approx 32 pieces. Made in the USA.   WARNING: California Prop 65    

Dent Fix Equipment DF-SP820 Slot Punch 8 X 20 Mm The Slot Pliers (DF-SP820) from Dent Fix Equipment are an essential tool when MIG brazing high strength steel (HSS) and ultra high strength steel (UHSS) parts for repair. MIG brazing is recommended when...

Dent Fix Equipment DF-GM Grounding Magnet DF-GM: 350 AMP Grounding Magnet - High strength magnet attaches to ground cable for a convenient, easy to use ground. Sold Individually.   WARNING: California Prop 65

Dent Fix Equipment DF-508TK 1/2 lb thick Wiggle Wire For Rocker Panels or other similar tasks. DF-508TK: 1/2 Lb thick Wiggle Wire .93, 3/32", 12 gauge, approx 14 pieces. Made in the USA.   WARNING: California Prop 65

Dent Fix Equipment DF-900PM/500 Alu-Magnesium Stud Pins - M4 x 25 The DF-900PM/500 is the consumable magnesium stud pins for the DF-900DX and DF-900DX/E. Same studs as the ones included with the purchase of an Aluspot. Amount: Bag of 500Size: M4 x 25...

Baileigh WP-750 welding positioner The WP-750 welding positioner from Baileigh Industrial is built to last using only the best components. This 110-volt powered machine has a 770 lb capacity in the vertical position and a 385 lb capacity in the...

Dent Fix Equipment DF-1780T Titanium Nitride Drill Bit - 8 x 80mm The DF-1780T is specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Available...