Titan WC-1500X-KIT-XX Titan Bulldog Moto Cradle Wheel Chock w/ Kit
With its dual action EZ-Load rocking and Cam Clamping design cradle, this wheel chock is unique to all others on the market today. Perfect for holding bikes upright for towing purposes or space saving storage, the Bulldog is extremely secure and simple to use. As your bike rolls into the chock, the rocking movement of the cradle allows you to effortlessly load the bike while it simultaneously clamps around the tire to properly hold it securely and in place. This heavy-duty steel constructed wheel chock has a safety latch to keep your bike safe and secure when loaded.
*2014 and newer Harley Davidson Touring & CVO FLH models require the custom profile cradle.
- Min Tire Diameter 13"
- Max Tire Diameter 22"
- Tire Width Range 70mm - 140mm
The Quick Detach Base is designed to make the task of mounting and dismounting your Bulldog Moto Cradle a snap. Once installed on your trailer or motorcycle lift, you can mount or dismount your chock in under 30 seconds. To mount, just slide the included shoulder bolts attached to your chock clamp bar into the keyhole slots on the base, slide forward, tighten the single wing-style bolt and you are done. Do those steps in reverse and you are ready to move your chock from the trailer to the garage. Mounting hardware is included. Buy one base for your trailer and one for your lift to fully utilize the versatile Titan Bulldog Moto Cradle, one chock for all your storage and transport needs.
- Length: 6.5"
- Width: 2.5"
- Center to center mounting holes: 5.75"
These rubber tire adapters will allow the Titan Bulldog to hold a tire with under 100 mm width with as much stability as if it were holding up a 130 mm tire. Simply slip these tire adapters over the four cradle points and you are ready to roll your narrow tires up into the Titan Bulldog Moto Cradle. NOTE: These adapters only work with tires 70mm - 100mm wide.
- Assist Arm N/A
- Tire Width Range 70mm - 100mm
With the Titan Bulldog tie down extensions there is no need to drill extra holes in your truck or trailer for tie downs. Simply add these extensions and the straps can hook straight to the Bulldog.
Other DetailsTitan Bulldog Motocradle product is warranted for replacement parts only to the original purchaser for a period of 2 years from the date of purchase to be free of defects in material and workmanship under normal use.
For all warranty Titan Ma LLC. will supply replacement parts only (shipping, handling, and by other) during the warranty period. All defe parts must be returned to Titan and which, upon our any parts which are defec ve in manufacture or workmanship will be replaced or put in good co These do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper voltage or lack of required maintenance. Any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with provided in the owner’s manual(s) supplied. Normal wear items or service normally required to maintain the product in a safe co Any component damaged in shipment. Other items not listed but may be considered general wear parts. Damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A TITAN MARKETING LLC. PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.