Ranger DST-2420 30" Maximum Wheel Diameter Capacity Wheel Balancer
RANGER DST 2420 Dynamic Wheel Balancer
The new and improved Ranger DST2420 wheel balancer now handles wheels up to 30” diameter. It is a highly accurate and dependable no-frills balancer that features our proprietary Digital Sensor Technology for critical reliability and repeatability.From one-bay shops to high-volume tire stores, the DST2420 is built with a gritty toughness that puts out perfectly balanced wheels day after day, around the clock. Like all of our DST Series wheel balancers, it’s a zero tolerance performer that features our proven Direct-Axis drive system, accurate to within hundredths of an ounce ensuring wheels are balanced vibration-free.
The DST2420 automatically calculates the exact weight needed to achieve an optimal balance for almost every tire and wheel configuration on the planet and brightly displayed LED’s mark the exact amount and location in just six seconds. A full-menu of time saving features that includes Dynamic, Static, and Performance Alloy settings allow you to balance OEM wheel configurations and performance wheels with minimal effort and speed.
Digital Sensor Technology
Our highly accurate Digital Sensor Technology features a 16-digit digital signal processor and single-chip technology that increases productivity and offers unprecedented speed and accuracy--especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.
Single-chip circuit board architecture provides an inherent performance and reliability advantage compared to multi-chip implementations of the same functionality. In addition to overall latency reductions, the single-chip architecture significantly boosts device throughput. An extremely fast dedicated hyper transport protocol allows data to communicate with the micro-processor at much faster speeds. This solution offers unmatched integration of features and functionality and results in lower power consumption and dissipated heat.
Multi-Directional Quartz Piezoelectric Load Sensors
The DST2420 uses highly precise dual-component piezoelectric quartz load sensors combined with a single digital rotation encoder that measure both longitudinal, transversal, and shear effects for multi-directional force unbalance detection. The piezoelectric force sensors used on the DST2420 are very sensitive and offer long-term stability and freedom from fatigue for a service life that is virtually unlimited. The high rigidity quartz crystal sensors result in very high frequency detection in all three directions of measurement.
- Quick and Precise Set-Up
Multi-size center cones and a full rubber perimeter no-mar “Quick-Nut” bell adapter makes mounting wheels fast and easy and minimizes the risk of costly wheel damage.
- Mounting Cone Package
The DST2420 tooling package not only includes our standard car and light truck cones, but a heavy-duty truck cone and spacer ring as well. This well equipped package includes three automotive and light truck cones; 1.75” - 2.75”, 2.75” - 3.50”, and 3.50” - 4.25”, and one truck cone 4.50” - 5.00”.
- Weight Optimization
The DST242000 automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line.
- Wheel Graphic Interface
A touch-pad display panel features tire and wheel assembly graphics to help simplify speed entry of wheel data and helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easy-to-read icons helping operators identify and command all balancing functions.
*Shipping is FREE to direct points within the 48-contiguous states.
**Ranger charges taxes to California**
**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone ***It is the buyer's responsibility to unload the freight at their location.
LED Rolling Wheel Weight Displays
Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact top-dead-center. Tiered weight placement indicators help identify out-of-sight weight placement such as split-weight or hidden “behind-the-spoke” techniques. Aids with clip-on, and tape weight placement at precise locations for zero-on balancing every time.
- Highly precise 64-bit architecture and single‐chip technology. Precision DataWand™ and inner data set arm allows you to quickly and automatically enter all wheel parameter settings in less than three seconds.
- Serpentine poly-V belt features a polyester-aramid fiber composite core to resist degradation of functional performance under extreme operating conditions. Poly-V belt mates perfectly with motor and spindle sheave for continuous tension and distribution.
- (1) Dynamic, (2) static, (1) standard alloy and variable alloy setting that enables you to select the exact weight placement location you choose for the specific wheel being serviced. Easily configured with the simple push of a button for a variety of wheel styles and designs.
- Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors.
- Low RPM balancing speed and rapid six-second cycle time.
- Automatic braking
- Gram/ounce selection and millimeter/inch selection
- An audible alarm and brightly displayed LED’s identify exact weight amounts and precise positioning for perfect balancing.
- Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques.
- Wheel restraint pedal secures wheels at precisely 12-o’clock for easier servicing and proper weight placement.
- LED inner wheel target light automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.
- Manual or automatic start when hood is lowered
- Self calibration function
- High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
- Precision-machined, hardened-steel 36-mm shaft (ACME thread 30-degree 3-P).
- Quick-release hub nut for dramatically reduced set-up times
- Side cone storage pegs keeps mounting cones readily available
- Open-sided hood design allows for a broader coverage of tire shapes and sizes
- Wheel Weight Starter Kit – Free samples of Ranger steel wheel weights are included.
- Starter Kit
- One bulk roll of 100 silver adhesive steel tape weights
- One bulk roll of 100 black adhesive steel tape weights
- One starter box of mixed clip-on steel weights
|Motor||1.5 hp / 110V/220V 50/60HZ 1Ph.|
|Working Temperature||-5C/27F - 50C/82F|
|Drive System||Belt Drive|
|Cycle Time||6-12 seconds (avg.)|
|Balancing Modes||Dynamic / Static / 3 Alloy|
|Top Positioning Weight Locator||Standard|
|Inside & Outside Measuring||Standard|
|Millimeter / Inches Selection||Standard|
|Ounce / Gram Selection||Standard|
|Wheel Offset Distance Setting||Manual|
|Auto Start when Hood is Lowered||Standard|
|Wheel Spin Braking||Automatic / Electronic|
|Wheel Holding Manual Brake Pedal||Standard|
|Centering Cones Included||3 Standard / 1 Truck|
|Truck Cone / Spacer Ring Adapter Set||Included Standard|
|Rear Cone Mount Spring||Standard|
|No-Mar Rear Cone Mount Pressure Cup||Standard|
|Quick-Release & Mount Hub Nut||Standard|
|Maximum Tire Diameter||47" / 1,194 mm|
|Max Tire Weight||145 pounds (65 kg)|
|Max. Wheel Diameter||10” - 30" / 254 - 762 mm|
|Wheel Width Capacity||2" - 18" / 51 mm - 457 mm|
|Balancing Increments||0.25 or 0.01 oz|
|Balancing Speed||180 RPM|
|Accuracy||+/- 1 gram / .035 oz|
|Resolution||0.01 ounce, 1.4°|
|Shipping Weight||398 lbs. / 181 kg|
WHEEL SERVICE EQUIPMENT WARRANTY
THE BEST WARRANTY IN THE BUSINESS - YOU HAVE OUR WORD
Duration: From the date of purchase by the original Purchaser; or 24‐12 months from the date of shipment by BendPak/Ranger or whichever comes first.
- Two Years (24-Months) Warranty on equipment structure*
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping** on ground‐freight charges related to warranty performance
1. Who gives this warranty (Warrantor): BendPak/Ranger, 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any Ranger brand tire changer, wheel balancer or brake lathe***
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by using equipment beyond rated capacity and/or capability
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber or plastic pads/protectors, cutting tips, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or other component failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Ranger product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications
6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak/Ranger will pay reasonable labor costs for the first 12 months only.
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak/Ranger Authorized Service Center. Freight costs, after 12‐months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Equipment structure is defined as any non‐moving permanently affixed frame or main body, or sub‐structures that are non‐moving and permanently affixed or attached to any main equipment structure or frame. **Free‐shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. ***For all Ranger brand tire changers, wheel balancers or brake lathes manufactured on or following 11/1/2011.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages BendPak/Rangerproductsareprovidedandsoldasiswithoutanyexpressorimpliedwarrantiesincludingwarrantiesofmerchantabilityorfitnessforparticularpurpose.No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
Frequently Bought Together
Total Price:+ Add to Cart
Please choose options for all selected products