GMC EPS-0610M 6 ft x 10 Ga Mechanical Shear - Shearing Machine
Features
- ISO 9001 certified.
- American design.
- With material front out tray.
- HD all steel construction for maximum rigidity.
- Precision driven gearbox.
- Full length 30 strokes per minute.
- 60” long squaring arm with inch / mm scale.
- Spring hold-downs.
- High grade carbon/chrome alloy steel blades and hardened to 62 HRC.
- 2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard.
- Front supports and (2) side gauges.
- Safety type foot pedal control.
- Jog, single continuous auto operation modes.
Specifications
| Cutting Capacity | |
| Mild Steel – HRS (tensile 60,000 PSI) | 6 ft x 10 Ga. |
| Stainless Steel (tensile 85,000 PSI) | 6 ft x 14 Ga. |
| Soft Aluminum (tensile 28,000 PSI) | 6 ft x 1/4 Ga. |
| Min. Thickness | 22 Ga. |
| Blade Length | 80" |
| Strokes per minute | 28 |
| Worktable height | 32" |
| Front support arm | 36" |
| Back gauge | 26" Manual Back gauge |
| Blade Rake Angle | 2.5 Degree |
| Main Motor | 7-1/2HP, 3 Phase 25A Prewired: 220VAC (15A/440VAC optional) |
| Machine Weight | 5,550 lbs. |
| Shipping Weight | 5,650 lbs. |
| Machine Dimensions | 100 x 43 x 68 in. |
| Shipping Dimensions | 100 x 43 x 68 in. |
Standard Equipment
- 26” manual back gauge with one side operated handwheel.
- 60” long squaring arm with inch / mm scale, mounted on right side of the table.
- 2 each 24” front support arms.
- Full length finger guard.
- Removable safety foot pedal control.
- One set of upper & lower blades.
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
