GMC GMM-949VPKG 9 x 49 in Vertical Mill / Metal Milling Machine with 2-Axis DRO
Features
- “Meehanite” Casting.
- “Turcite B” Coating on X/Y ways.
- ISO 9001 certified.
- GMM-949V has variable spindle speeds from 70-4,300 rpm
- Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion).
- Heavy Duty “Meehanite” casting.
- Hardened & ground dovetail guideways.
- Hand scraped precision ways.
- Hardened & ground table and ground table T-slots.
- Precision ground ACME Leadscrews.
- Chromed ground quill (spindle).
- Chromed dials.
- Adjustable ways.
- Hand brake on mill head.
- Tilting & rotating head.
- Manual or automatic quill feeds 0.0015”, 0.003”, 0.006” per spindle revolution.
- One shot lube system.
- front and rear rubber chip guards.
- (1) manual draw bar.
- Tool box with tools.
- Power source 220V, 3 phase.
Specifications
| Table Size | 9 x 49 in. |
| Table Load Capacity | 650 lbs. |
| X Axis Travel | 35-1/2 in. |
| X Travel with Power Feed | 31-1/2 in. |
| Y Axis Travel | 12 in. |
| Z Axis Travel | 17 in. |
| Spindle Taper Type | R8 |
| AC Spindle Motor | 3 HP, 220V/10A - 440V/5A |
| Spindle speeds | 70-4,300 RPM (variable speeds) |
| Quill ( Spindle ) diameter | 3-3/8 in. |
| Quill ( Spindle ) travel | 5 in. |
| Ram travel | 12 in. |
| Table T-slot size | 5/8 in. x 3 slots |
| Head Swivel, R/H , L/H | 90 degrees |
| Weight | 2,650 lbs. |
Standard Equipment
- SINO DRO, X Y Axis (installed).
- Table Power Feed X Axis, (installed).
- Way covers.
- One draw bar (23").
- One shot lube.
- Tool box.
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
