GMC FP-4075W 40 x75 in Single Belt Head - Wet Type
Features
- Abrasive belt size: 40” x 75”
- Motorized Table Lift with computer display.
- Variable Speed Conveyor.
- Conveyor Forward & Reverse.
- Belt Safety Overtravel Switches.
- Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust the tracking system when running extremely out of parallel belts.
- 4-Jackscrew Table Support.
- Double Infeed & Outfeed Pinch Rolls with protective guards.
- Conveyor Belt Tracking System.
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device.
- Table Height Digital Readout.
- Load Meter indicates percentage of full motor loads.
- Belt change door electrically interlocked for safety purpose.
- Air tensioning of belt for accurate tensioning & compensation of belt stretch.
- Quick release sanding head support for fast belt change.
- Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area.
- Emergency stops from almost any point.
- Noise level bellows 82 dba.
- Operation manual, control tags, danger signs, and warning labels in English on machine.
- 208/230V, 3-Phase.
Specifications
Max. Part Width | 40" |
Abrasive Belt Size | 40" x 75" |
Contact Roller Size | 8" Dia. |
Passline Height | 31" - 37" |
Max. Thickness Capacity | 6 1/8" |
Conveyor Drive Speeds | 8 - 40 FPM |
Infeed Conveyor Length | 20" |
Dust Colector Capacity | 1,800 CFM |
Main Motor | 15 HP 3 Phase Prewired: 230VAC Optional: 460VAC |
Conveyor Motor | 1.5 HP 3 Phase Prewired: 230VAC Optional: 460VAC |
Table Lifting Motor | 1 HP 3 Phase Prewired: 230VAC Optional: 460VAC |
Net Weight, Approx Shipping Weight | 4,650 LBS 4,859 LBS |
Machine Dimensions (LxWxH) Shipping Dimensions | 76" x 88" x 81" 73" x 67" x 86" |
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.