Free Shipping

JET Tools J-9180-3 7" Zip Miter Horizontal Bandsaw The JET J-9180-3 is a 7-inch horizontal mitering bandsaw with a head that swivels over a stationary base, keeping the workpiece clamped while the head sets the angle. It cuts miters from 0 to 60...

JET Tools TAK-13GH/BD Taper Attachment The JET TAK-13GH/BD is a taper attachment for JET BDB and GHB bench lathes. It mounts to pre-drilled and tapped holes on the lathe to let the operator cut tapers up to the model's rated capacity...

JET Tools CS-275, 275mm Ferrous Manual Cold Saw The JET CS-275 is a manually operated ferrous cold saw that cuts steel and other metals with a 275mm circular blade for clean, burr-free results. A flood coolant system and oil-bath gearbox support...

JET Tools J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 1PH The JET J-8201VS is a 14-inch vertical bandsaw built for both metal and woodworking shops. Its variable-speed gearbox lets a single machine handle ferrous metal, non-ferrous metal,...

JET Tools HVBS-710S, 7" x 10-1/2" Horizontal/Vertical Mitering Bandsaw The JET HVBS-710S is a horizontal/vertical mitering metalworking bandsaw whose head swivels while the base stays stationary, so the workpiece can remain in place for accurate...

JET Tools J-A5818 15" Variable Speed Floor Model Drill Press 230/460V The JET J-A5818 is the 230/460V three-phase variable-speed floor-model drill press with a continuously variable transmission, allowing speed changes during operation. A scale-marked...

JET Tools J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1PH The JET J-A5816 is a variable-speed floor-model drill press with a continuously variable transmission, allowing speed changes during operation. A scale-marked handwheel sets...

JET Tools J-A3816, 15" 6-Speed Floor Model Drill Press 115/230V 1PH The JET J-A3816 is a heavy-duty 6-speed floor-model drill press built with the rigidity needed for metalworking tolerances. An oversized drill head with widely spaced bearings supports...

JET Tools HVBS712DV  Variable Speed Horizontal/Vertical Bandsaw Deluxe1HP, 115V, 1PH The JET HVBS-712DV is the deluxe variable-speed version of JET's 7x12 horizontal/vertical metalworking bandsaw, powered by a 3-step gear DC motor for high torque...

JET Tools CC-GHB1340A 5C Collet Closer The JET CC-GHB1340A is a collet closer for the GHB-1340 lathe. It uses 5C collets with a rear-mounted lever action and precision-ground components to hold workpieces securely during turning...

JET Tools CCS-1, R-8 Chuck and Collet Set The JET CCS-1 chuck and collet set fits R-8 spindle milling machines and replaces individual adaptors with 15 precision spring collets in 1/16-inch increments. Shank sizes change quickly without loosening the...

Hofmann EEWA715TBV3 Geoliner 678 Wheel Alignment System w/ AC400 and Vin Reader With the geoliner 678, automotive shops can maximize their profitability by investing in an advanced wheel alignment system. This superior technology helps reduce operating...