Corghi EM9980C PLUS Wheel Balancer
The Corghi EM9980C PLUS is a super-automatic diagnostic touchless wheel balancer with touchscreen interface and automatic wheel detection and electronic clamping. Fast, accurate, reliable and easy-to-use.
Features
- Fully Automatic
- Touchscreen Interface
- Wheel Dimension with Contactless System
- Automatic Positioning and LED Illuminator
- Laser Line Pointer for Application of Counterweights
- Hidden Weight Automatic
- Laser Run-Out Measurement
- Intelligent Positioning Lite
- Automatic Wheel Clamping
- Weight Management
- Multifunction (One-Touch) Button
- Ergonomic and Functional Weight Tray
- USB Port for Software Upgrading
- Slanted Front and Compact Wheel Guard
Specifications
| Technical Data | EM9980C Plus |
| Corghi Part Number | 0-21109983/00 |
| Power Supply Voltage | 230V / 1ph / 50hz, 115V / 1ph/ 60hz |
| Total Power Absorption | 550 W |
| Balancing Speed | 75-85-98 rpm |
| Max. Unbalance Value Calculated | 999 g 35.3 oz |
| Resolution | 1-5 g 0.0353 - 0.1764 oz |
| Average Measurement Time | 7 s (14kg wheel - 30.8 lb) |
| Shaft Diameter | 40 mm / 1.57" |
| Rim Diameter Setting Range | 1"-35" |
| Rim Diameter Measurement Range | 10"-32" |
| Max. Wheel Width (with Guard) | 22" / 560 mm |
| Max. Wheel Diameter (with Guard) | 44" / 1118 mm |
| Max. Wheel/Machine Distance | 10.82" / 275 mm |
| Max. Wheel Weight | 165.3 lbs. / 75 kg |
| Machine Weight | 403.4 lbs. / 183 kg |
Downloads
CORGHI USA Limited Warranty
General Terms
Corghi USA expressly warrants its products will be free from defects in material and/or workmanship for the time period specified. Corghi USA must be informed in writing within 7 days after discovery of a defect. Corghi USA reserves the right to repair or replace a product at our discretion. Co nsumable products and accessories such as but not limited to; plastic protection parts, bead breaker pads, inflation hoses, and rollers, are not covered under this warranty.
This warranty does not cover any damage resulting from abuse or failure to perform any necessary maintenance (i.e. damage due to or resulting from, faulty installation, neglect, misuse, improper electrical connections or electrical surges, problems resulting from excessive water, contaminated air system, or pollutant of any nature, fire or freight damage).
Corghi machines are warranted to be free of defects as follows:
Tire Changers:
A2030, A2024TI, 2024TI LL, A9824TI, A9824 LLTI, A9830, A9222TI, Service Pro 124, Service Pro 324 - 2 year parts and 1 year labor. Transmission – 10 year part only (5 year part only on 9220TI).
AM50, AM500, AM5000, AM26, Master J, Master Code, Master28 – 2 year parts and 1 year labor.
HD700, AG52L, HD1200, Monster TT – 2 year parts and 1 year labor.
NOTE: Rubber Pads, air lines, gauges, mount/demount heads, and swabs - 90 day warranty
Tire Balancers:
PL60, Service Pro 750, EM9250, EM9280, EM9580, EM9550, EM9980C, Eyelight – 2 year parts and 1 year labor.
ET66, ET88 – 2 year parts and 1 year labor.
Alignment Machines/Specialty Equipment:
2 year parts and 1 year labor.
Disclaimer & Limitation on Liability.
Corghi USA agreement to repair a tire changer or balancer is expressly in lieu of all other warranties, express, implies or statutory, including any warranties for merchantability and fitness for a particular purpose. Corghi USA maximum liability shall be limited to the cost of the machine. In no event shall Corghi USA be responsible for owner’s lost profits, goodwill or other incidental or consequential damages. Corghi USA is not responsible for equipment or accessories damages in shipment. Freight claims are to be made directly with the carrier. We will be more than happy to assist you with any questions regarding filing claims.
