Challenger Lifts Ev1220 Inground Vehicle Lifts
- Challenger Lifts
The NEW EV1220 heavy-duty inground vehicle lifts are ideal for starting or expanding your commercial fleet service capabilities. Heavy-Duty
Inground Vehicle Lifts require less shop space than surface mounted lifts, maximizing the number of service bays.
The EV1220 inground vehicle lifts are equipped with standard, medium and high extension stack adapters to accommodate a wide variety of Heavy-Duty vehicle lift points. Challenger Heavy-Duty Inground Vehicle Lifts are fully contained in a recycled polymer housing to protect your investment and the environment.
With over 50% more bearing contact surface than competitor’s vehicle lifts, enhanced wipers both top and bottom and NEW larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable lift resulting in increased productivity.
The traditional EV1220 inground lifts come standard with Part# 10315Stack Adapter Extension Kit and #10318 Four Frame Engaging Truck Adapters. Frame engaging adapters (Part #10314 or 10318) are REQUIRED when lifting vehicles with frame construction.
- NEW larger 8 1/2" chrome diameter piston provides greater stability.
- NEW enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings}
- Over 50% longer bearing contact than competitor lifts provides increased stability.}
- Mechanical lock engages every 3" provides safety and allows technician to work at their ergonomic height to increase productivity and minimizes fatigue.
- Stainless Steel air lock release cylinder promotes longer working life with its corrosion resistant design.
- Fully contained and sealed recycled polymer cassette tub Fully contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground.
- Standard combination stack screw pads accommodate a wide range of vehicle pick up points.
- Lift Capacity: 12,000 lbs.
- Stroke: 68"
- Rise Height: 81 1/4"
- Width Overall: 99"
- Drive-Thru Clearance: 87"
- Reach (Arm Minimum) 32"
- Reach (Arm Maximum) 49-1/4"
- Adj. Adapter Height: 5-7 1/4"
- Adj. Adapter Height: 8"-10 1/4"
- Adj. Adapter Height: 11"-13 1/4"
- Capacity (Per Arm) 3000 lbs.
- Guide Plunger Diameter: 8 1/2
- Motor: 2HP
- Voltage (Single Phase Std.) 208v-230v
- Speed of Rise: 60 seconds
- Air Required: 75-125 psi
- Ceiling Height Required: 82" plus height to tallest vehicle
- Shipping Weight: 3100 lbs.
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
|Description||Model/Series||Labor||Functional Parts||Structural parts||Extended Warranty Available|
|CL10||CL10||1 Year||2 Years||5 Years||Yes|
|10K 2-Post, 9K 2-Post||LE10, SA10, CLFP9||1 Year||1 Year||5 Years||No|
|12K, 15K, 18K 2-Post||CL12, 15000, 18000||1 Year||2 Years||5 Years||Yes|
|8K Inground||EVW0820||1 Year||2 Years||2 years||No|
|10K Ingrounds||EV1020||1 Year||2 Years||5 Years||Yes|
|12K, 15K Ingrounds||EV1220, EV1520||1 Year||1 Year||5 Years||Yes|
|14K 4-Post||4P14||1 Year||1 Year||5 Years||No|
|15K 4-Post||4015||1 Year||2 Years||5 Years||No|
|30K 4-Post Cable Drive||4030||1 Year||2 Years||5 Years||No|
|30K, 40K, 60K Chain Drive||44030, 44040, 44060||1 Year||1 Year||1 Year||No|
|Rolling Jacks||RJ, SAJ||1 Year||1 Year||1 Year||No|
|Mid and Short Rise||MR-6, SRM-10||1 Year||1 Year||1 Year||No|
|Scissors||SX14, DX77||1 Year||1 Year||1 Year||No|
|Mobiles||CLHM||1 Year||1 Year||5 Years||No|
|Replacement Parts||90 days||No|
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
Frequently Bought Together
Total Price:Add to Cart
Please choose options for all selected products