Challenger Lifts 4015EFX Closed Front 15,000 Lbs Four Post Car Lift
- Brand:
- Challenger Lifts
- SKU:
- 4015EFX
- Condition:
- New
Factory Shipped
Factory Shipped
Challenger Lifts 4015EFX Closed Front Four Post Car Lift
Challenger Lifts' 4015series 15,000 lb. four post automobile lifts has a full package for broadening your service profits. The 4015series 4 post lift is available in a number of setups including open front general service flat deck car lifts and closed front general service flat deck automobile lifts and alignment rack car lift packages that support today's most current camera imaging positioning systems. With the 4015series 4 post automotive lift, companies have the ability to service the smaller automobiles and medium-duty trucks, vans and fleet vehicles on one vehicle lift.
The 4015 series 4-post hydraulic car lifts have a cable lifting design, operate 208-230v single phase electrical power (optional 3-phase readily available), have a single point air actuated lock launch that disengages all column locks concurrently for maximum performance and workflow. 4015series four post car lifts flaunt the most working space below the runways with the highest increase in the market at 78", and the lowest profile runways in the automobile lift business at 7". With large 9 1/2" steel pulleys with Teflon ® bearings, 1/2" cable thickness, totally gusseted base plate and top shroud, offset wrapped column design and louvered approach ramps with anti-skid runway surfaces, the 4015series 4 post lift is constructed to lift and constructed to last.
Closed-Front General Service Flat Deck 4-post lift w/ 20" wide runways, 244-1/2" Overall Extended Length
Features:
- 78" rise height, the highest rise in the industry provides maximum head room for working underneath vehicles.
- 80" rear recessed free floating slip plates offer a wider range of 4 wheel alignment capacities and accommodates longer wheelbase vehicles.
- 14 level lock positions allows technician to work at an ergonomic working height to increase productivity and minimize fatigue.
- 9-1/2" steel pulleys, Teflon® bearing and 1/2" cable diameter minimizes undo wear and tear and prolong pulley and cable life.
- Heavy-Duty front bearing and yoke assemblies distribute contact load to reduce column stress for longer product life.
- Recessed stainless steel turning radius gauges provide more precise alignment readings.
- Fully gusseted base plate design reduces column deflection and makes lift less sensitive to uneven floors.
- Louvered approach ramps and non-skid runway surface prevent wheel spin and provide positive vehicle traction and technician safety.
- Single point air actuated lock release disengages all column locks simultaneously. 10. 7" runway height allows easy access for lower profile vehicles.
|
| Open Front | Closed Front | ||||||
|---|---|---|---|---|---|---|---|---|
| Alignment Rack Package | Flat Deck | Alignment Rack Package | Flat Deck | |||||
| Model Number | AR4015EAO | AR4015XAO | 4015EFO | 4015XFO | AR4015EAX | AR4015XAX | 4015EFX | 4015XFX |
| Lift Capacity | 15,000 lbs. | 15,000 lbs. | ||||||
| A Length Overall | 20' 9" (6325mm) | 23' (7010mm) | 20' 9" (6325mm) | 23' (7010mm) | 20' 4-1/2" (6210mm) | 22' 8" (6909mm) | 20' 4-1/2" (6210mm) | 22' 8" (6909mm) |
| B Width Overall | 11' 10" front - 11' 2-1/2"rear (3607mm front - 3416mm rear) | 11' 2-1/2" (3416mm) | ||||||
| CInside Columns | 120" front - 120" rear (3048mm front - 3048mm rear) | 120" (3048mm) | ||||||
| D Between Columns | 195" (4953mm) | 222 1/2" (5652mm) | 195" (4953mm) | 222 1/2" (5652mm) | 196" (4978mm) | 223 1/2" (5677mm) | 196" (4978mm) | 223 1/2" (5677mm) |
| E Height of Columns | 8' 3-1/2" front - 7' 9-1/2"rear (2527mm front - 2375mm rear) | 7' 6-1/2" (2299mm) | ||||||
| F Height of Runways | 7" (178mm) | 7" (178mm) | ||||||
| G Width of Runways | 20" (508mm) | 20" (508mm) | ||||||
| H Width between Runways (Minimum / Maximum) | 43" (1092mm) | 40" / 43" (1016mm / 1092mm) | ||||||
| I Maximum Wheelbase1 | 182 1/2" (4635mm) | 210" (5334mm) | 182 1/2" (4635mm) | 210" (5334mm) | 182 1/2" (4635mm) | 210" (5334mm) | 182 1/2" (4635mm) | 210" (5334mm) |
| J Rise Height | 78" (1981mm) | 78" (1981mm) | ||||||
| Max. 2 Wheel Alignment | 166 1/2" (4229mm) | 194" (4927mm) | N/A | 166 1/2" (4229mm) | 194" (4927mm) | N/A | ||
| 4 Wheel Alignment | 88" - 158" (2235mm - 4013mm) | N/A | 88" - 158" (2235mm - 4013mm) | N/A | ||||
| Air Supply Required | 90 -120 psi Clean & Dry | 90 -120 psi Clean & Dry | ||||||
| Motor | 2HP | 2HP | ||||||
| Voltage (1 Phase Std.)2 | 208v - 230v | 208v - 230v | ||||||
| Speed of Rise | 85 seconds | 85 seconds | ||||||
| Min. Recomm. Bay Size | 12´ x 24" | 12´ x 26" | 12´ x 24" | 12´ x 26" | 12´ x 24" | 12´ x 26" | 12´ x 24" | 12´ x 26" |
| Shipping Weights | 4800 lbs. (2177 kg) | 4950 lbs. (2245 kg) | 3980 lbs. (1805 kg) | 4160 lbs. (1887 kg) | 4400 lbs. (1996 kg) | 4600 lbs. (2087 kg) | 3610 lbs. (1637 kg) | 3790 lbs. (1719 kg) |
1 Maximum wheelbase is based on a tire diameter of 30".
2 Optional 3 phase electrical also available.
Standard Lift colors are Red and Blue. Optional colors available.
*Shipping is FREE to direct points within the 48-contiguous states.
***It is the buyer's responsibility to unload the freight at their location.
****The Challenger Lifts AR4015XAO is an ALI Certified Lift. Click here to view its certification.
Challenger Lifts Warranty Agreement
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml
| Description | Model/Series | Labor | Functional Parts | Structural parts | Extended Warranty Available |
| CL10 | CL10 | 1 Year | 2 Years | 5 Years | Yes |
| 10K 2-Post, 9K 2-Post | LE10, SA10, CLFP9 | 1 Year | 1 Year | 5 Years | No |
| 12K, 15K, 18K 2-Post | CL12, 15000, 18000 | 1 Year | 2 Years | 5 Years | Yes |
| 8K Inground | EVW0820 | 1 Year | 2 Years | 2 years | No |
| 10K Ingrounds | EV1020 | 1 Year | 2 Years | 5 Years | Yes |
| 12K, 15K Ingrounds | EV1220, EV1520 | 1 Year | 1 Year | 5 Years | Yes |
| 14K 4-Post | 4P14 | 1 Year | 1 Year | 5 Years | No |
| 15K 4-Post | 4015 | 1 Year | 2 Years | 5 Years | No |
| 30K 4-Post Cable Drive | 4030 | 1 Year | 2 Years | 5 Years | No |
| 30K, 40K, 60K Chain Drive | 44030, 44040, 44060 | 1 Year | 1 Year | 1 Year | No |
| Rolling Jacks | RJ, SAJ | 1 Year | 1 Year | 1 Year | No |
| Mid and Short Rise | MR-6, SRM-10 | 1 Year | 1 Year | 1 Year | No |
| Scissors | SX14, DX77 | 1 Year | 1 Year | 1 Year | No |
| Mobiles | CLHM | 1 Year | 1 Year | 5 Years | No |
| Accessories | 90 days | No | |||
| Replacement Parts | 90 days | No |
Extended Warranty
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.
Challenger Lifts 10310 Air/Electric Workstation
$529.36
$365.07
Challenger Lifts 3PH4P 3 Phase Power Unit Upgrade
$571.00
$393.79
