Challenger Lifts CL12A Auto Lift Cl12 2Post 1Ph

Challenger Lifts

SKU:
CL12A
Condition:
New
Availability:
$450 Rebate program available! Call 800-562-4791 for details.
Shipping:
Free Shipping
Total Price:
MSRP: $16,705.66
$10,691.62
(You save  $6,014.04 )
Adding to cart… The item has been added

Challenger Lifts CL12A Auto Lift, 2Post, 1Ph

Service more vehicles and make more money with Challenger Lifts' New 12,000 lbs. 2-Post lifts, which now feature the same width adjustability we developed for our 16K & 20K 2-Posts.

Features

  • Accommodate a wide range of standard cars, trucks, vans, and SUVs within the same service bay with +6″ & +12″ width adjustment (during installation)
  • Alternative versions +1′ column height extension & +2′ column height extensions available for purchase
  • 3-Stage front and rear arms
  • premium telescoping footpads.
  • Adjustable Height
  • Adjustable Width
  • Geared Arm Restraints
  • Single-Point Mechanical Lock Release System
  • Oversized Steel Pulleys
  • 60" Lifting Carriage
  • Padded Overhead Shut Off System
  • Enhanced Screw Pads
  • New Textured Powdercoating
  • Premium telescoping screw pads adjust to multiple heights minimizing the need for additional adapters.
  • Adjustable columns allow for flexibility during installation.
  • Optional dual pendant controls improve spotting accuracy and allow lifting control from either column.

Specifications

Model NumberCL12A
 Lifting Capacity  12,000 lbs.
 Lifting Configuration  Symmetric
 Arms  3-stage front/3-stage rear
 Rise Height  84.75"
 Overall Height  13' 2" or 13' 8"
 Adjustable Width Overall  142" / 148" / 154"
 Drive-Thru Clearance  103.5”, 109.5" or 115.5"
 Floor to Overhead Switch  12' 8" or 13' 2"
 Arm Reach (Min.)  27.5”
 Arm Reach (Max.)  59”
 Screw Pad Height *  4.75" - 6.625"
 Inside Columns  114.5" / 120.5" / 126.5"
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise (approximate)  63s
 Ceiling Height Required  14' 3" Minimum
 Colors Available  Red, Blue, Black
 ALI® Certified  Yes

Optional Accessories (sold separately)

 Part No.  Description
 B2270  Standard Footpad
 B2260  Round Rubber Footpad
 B2280PR  GM ® Truck Footpad Set
 TFPK  Electric Vehicle Footpad Kit
 10316  Organizer Rack
 B99700  Tire Tool Center
 B2206-3  3" Adapter
 10313  6" Adapter
 10314  Frame Adapters
 10333  Sprinter Kit

Downloads

Specs Sheet
Installation, Operation & Maintenance Manual

Other Models

Model NumberCL12ACL12A-1CL12A-2CL12A-LC
 Lifting Capacity  12,000 lbs.  12,000 lbs.  12,000 lbs.  12,000 lbs.
 Lifting Configuration  Symmetric  Symmetric  Symmetric  Symmetric
 Arms  3-stage front/3-stage rear  3-stage front/3-stage rear  3-stage front/3-stage rear  3-stage front/3-stage rear
 Rise Height  84.75"  84.75"  84.75"  80.75"
 Overall Height  13' 2" or 13' 8"  14' 2" or 14' 8"  15' 2" or 15' 8"  11' 11"
 Adjustable Width Overall  142" / 148" / 154"  142" / 148" / 154"  142" / 148" / 154"  142" / 148" / 154"
 Drive-Thru Clearance  103.5”, 109.5" or 115.5"  103.5”, 109.5" or 115.5"  103.5”, 109.5" or 115.5"  103.5”, 109.5" or 115.5"
 Floor to Overhead Switch  12' 8" or 13' 2"  13' 8" or 14' 2"  14' 8" or 15' 2"  11' 4.5"
 Arm Reach (Min.)  27.5”  27.5”  27.5”  27.5"
 Arm Reach (Max.)  59”  59”  59”  59"
 Screw Pad Height *  4.75" - 6.625"  4.75" - 6.625"  4.75" - 6.625"  4.75" - 6.625"
 Inside Columns  114.5" / 120.5" / 126.5"  114.5" / 120.5" / 126.5"  114.5" / 120.5" / 126.5"  114.5" / 120.5" / 126.5"
 Motor / Voltage  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph  2HP, 208v-230v, 60Hz, 1Ph
 Speed of Rise (approximate)  63s  63s  63s  60s
 Ceiling Height Required  14' 3" Minimum  15' 3" Minimum  16' 3" Minimum  12' Minimum
 Colors Available  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black  Red, Blue, Black
 ALI® Certified  Yes  Yes  Yes  Yes

* Lift capacity ratings are based on loads equally distributed on all four arms.

** Lifting and lowering speeds may vary depending on the weight of the vehicle.

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.