Challenger Lifts CL4P9X 9000 Lbs Four Post Tall Home Car Lift

Challenger Lifts

Factory shipped
Free Shipping
9,000 Lbs
  • Challenger Lifts RJ4.5 4500 Lb Capacity Rolling
  • Challenger Lifts CL4P9CS Caster Set (Set Of 4)
  • Challenger Lifts CL4P9ER Aluminum Extended Ramps
  • Challenger Lifts CL4P9SR Steel Bolt-On Pivoting Ramp (Set Of 2)
Total Price:
MSRP: $9,442.33
(You save  $3,399.24 )
Adding to cart… The item has been added

Challenger Lifts CL4P9X 9,000 Lbs Four Post Tall Home Car Lift 

CL4P7/CL4P9 Series

Challenger’s 7,000 lb. capacity and 9,000 lb. capacity 4-post garage lifts offer maximum versatility. These lifts can complement a home enthusiast’s garage or commercial storage application. They can also handle any light duty general service application. Choose between a wide range of optional accessories to customize your lift to exactly meet your needs.


  • 7,000 lb. lifting capacity or 9,000 lb. lifting capacity models available
  • Up to 85.5” service rise height in top locked position
  • Up to 80″ clearance in top locked position for storage application
  • Multiple heights, lengths and widths available (9,000 lb. models only)
  • Adjustable lock ladders allow for a versatile install with sensitivity to uneven floors
  • Commercial-grade formed runways ensure a strong, stable unit
  • Single-point manual lock release disengages column locks simultaneously
  • Air not required for operation
  • Anchoring not required to maintain ALI/ETL certification
  • Larger columns and base plates add stability  (9,000 lb. models only)
  • Built-in runway rail system provides versatility to add convenience options like rolling jacks and oil drip trays (sold separately)
  • Powder coat finish provides long-lasting durability

Specific Features of CL4P9X

 Model Number  CL4P9X
 Lifting Capacity  9,000 lbs.
 Length Overall  233.5”
 Width Overall  112.25”
 Inside Columns  95”
 Between Columns  184.75”
 Height of Columns  8’ .5”
 Height of Runways (Floor to top of Runway)  7”
 Width of Runways  20”
 Width Between Runways  38”
 Rise Height (Top of Runway at top position)  85.5”
 Clearance Height (Storage)  80"
 Max. Wheelbase*  179”
 Crossbeam Clearance Height  80”
 Motor  1HP/2HP
 Voltage (1 Phase Std)  115v/230v
 Speed of Rise (115v/230v)  120/60 s
 Min. Recommended Bay Size  11’ x 22’
 ALI/ETL Certified  Yes
 Colors Available  Black

Additional Parts and Accessories

Productivity Accessories
Part No. Description
 RJ3.5  Hand pump rolling jack - 3,500 lbs. capacity (CL4P7 only)
 RJ4.5  Hand pump rolling jack - 4,500 lbs. capacity (CL4P9 only)
 RJ04-PK  Air/Hydraulic Pump Kit - Converts RJ4.5 to air or hydraulic operation
 CL4P9JT  Jack Tray - 4,500 lbs. capacity
 CL4P9DTP  Plastic Drip Tray Set (set of 4)
 CL4P9SP  Aluminum storage platform set (set of 4) (CL4P9 only).
 CL4P9CS  Caster Set (set of 4) to make CL4P9 lifts portable
 CL4P9SR  36 in. Aluminum Ramp Set
 CL4P9ER  50" Extended Aluminum Ramp Set
 CL4P9PR  Steel Bolt-On Pivoting Ramp (CL4P9 only)


Other Models

 Model Number  CL4P7  CL4P9S  CL4P9X  CL4P9W
 Lifting Capacity  7,000 lbs.  9,000 lbs.  9,000 lbs.  9,000 lbs.
 Length Overall  195.5”  209.5”  233.5”  233.5”
 Width Overall  100.5”  112.25”  112.25”  127.25”
 Inside Columns  92.125”  95”  95”  110”
 Between Columns  147.5”  160.5”  184.75”  185.75”
 Height of Columns  6’ 7.5”  7’ .5”  8’ .5”  8’ .5”
 Height of Runways (Floor to top of Runway)  5.75”  7”  7”  7”
 Width of Runways  20”  20”  20”  20”
 Width Between Runways  38”  38”  38”  38”
 Rise Height (Top of Runway at top position)  68.125”  73.25”  85.5”  85.5”
 Clearance Height (Storage)  63'  67.75"  80"  80"
 Max. Wheelbase*  141.5”  155”  179”  179”
 Crossbeam Clearance Height  63”  68”  80”  80”
 Motor  1HP/2HP  1HP/2HP  1HP/2HP  1HP/2HP
 Voltage (1 Phase Std)  115v/230v  115v/230v  115v/230v  115v/230v
 Speed of Rise (115v/230v)  120/60 s  120/60 s  120/60 s  120/60 s
 Min. Recommended Bay Size  10’ x 20’  11’ x 22’  11’ x 22’  14’ x 22’
 ALI/ETL Certified  Yes  Yes  Yes  Yes
 Colors Available  Black  Black  Black  Black


Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc.,

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.


Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.