Bendpak XPR-15CL-192 Extra Tall, 15,000 2 Post Car Lift
The XPR-15CL two-post car lift offers 15,000 lbs. of lifting power. Not only does this lift let you operate on low-profile cars, it has the ability to lift some extremely heavy trucks and vans. 15,000 lbs. is enough to lift a dump truck, so you’re covered on most lifting applications.
The XPR-15CL two-post car lift raises the bar (or should we say car) in terms of extreme lifting power, quality and value. 15,000 lbs. is a whole lot of lifting power. Not only does this lift let you operate on low-profile cars, it has the ability to lift some heavy trucks and vans. 15,000 lbs. is enough to lift a dump truck, so you’re covered on most lifting applications.
The XPR-15CL comes with the same safety features as our other XPR series lifts. Easy-to-use, friendly interfaces come with the best customer service and installation teams in the business. BendPak makes getting a powerful lift that fits in your garage a hassle-free experience
Features
- 15,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shutoff bar
- Extended height top-beam provides greater overhead clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- Multi-piece adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks
- Convenient storage is included for truck and van adapters
- Versatile drop-in contact pads with stackable adapters
Specifications
| Capacity | |
| Lifting Capacity* | 15.000 lbs. (6804 kg) |
| *Max Capacity / Front Axle | 7500 lbs. (3402 kg) |
| *Max Capacity / Rear Axle | 7500 lbs. (3402 kg) |
| Rise | |
| A - Rise: | 69" (1753 mm) |
| B - Rise + Pad Only: | 74" (1880 mm) |
| C - Rise + Pad + 63 mm Adapter: | 80" (2032 mm) |
| D - Min. Height + Pad: | 5" (127 mm) |
| Time to Full Rise: | 90 seconds |
| Outside Dimensions | |
| E - Height Overall: | 170" (4318 mm) |
| F - Width Overall: | 155" (3937 mm) |
| G - Outside Columns: | 144" (3658 mm) |
| Inside Dimensions | |
| H - Inside Columns: | 120" (3048 mm) |
| I - Drive-Thru Clearance: | 106" (2692 mm) |
| J - Floor To Overhead Switch: | 165" (4191 mm) |
| Arms & Pads | |
| K - Front Arm Reach: (MIN) | 39" (991 mm) |
| K - Front Arm Reach: (MAX) | 60" (1524 mm) |
| L - Rear Arm Reach: (MIN) | 39" (991 mm) |
| L - Rear Arm Reach: (MAX) | 60" (1524 mm) |
| Max Load Per Arm | 3750 lbs. (1701 kg) |
| Power Unit | |
| Motor: | 220 VAC / 60 Hz / 1 Ph |
| Noise: | 45 dB |
| Shipping | |
| Weight: | 2,682-lbs. (1,216.5 kg) |
| Dimensions: | 176'' x 29'' x 35'' (4,483 mm x 736 mm x 889 mm) |
Accessories
Downloads
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.
