Bendpak XPR-15CL 15,000 Lbs Clear-floor 2-Post Lift

BendPak

SKU:
BP-5175408
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Capacity:
15,000 Lbs
  • Ranger Rjs-1T 1,650-Lb.High Reach Jack Stand
  • Ranger Rd-9G 9-Gallon Upright Portable Oil Drain
Total Price:
MSRP: $16,794.00
$13,995.00
(You save  $2,799.00 )
Adding to cart… The item has been added

jmc-shipping-button-ii.pngBendPak XPR-15CL 15,000 Lb. Capacity 2 Post Lift 15,000 lbs. Capacity, Clearfloor, Standard Arms

The XPR-15CL two-post car lift offers 15,000 lbs. of lifting power. Not only does this lift let you operate on low-profile cars, it has the ability to lift some extremely heavy trucks and vans. 15,000 lbs. is enough to lift a dump truck, so you’re covered on most lifting applications.

The XPR-15CL two-post car lift raises the bar (or should we say car) in terms of extreme lifting power, quality and value. 15,000 lbs. is a whole lot of lifting power. Not only does this lift let you operate on low-profile cars, it has the ability to lift some heavy trucks and vans. 15,000 lbs. is enough to lift a dump truck, so you’re covered on most lifting applications.

The XPR-15CL comes with the same safety features as our other XPR series lifts. Easy-to-use, friendly interfaces come with the best customer service and installation teams in the business. BendPak makes getting a powerful lift that fits in your garage a hassle-free experience

direct-drive-tech-logo.jpg bendpak-521-warranty.jpg 

safe-balancing.jpg carlift-guide.jpg top-10-buyers-guide-horz200.jpg

Features

  • 15,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • Multi-piece adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks
  • Convenient storage is included for truck and van adapters
  • Versatile drop-in contact pads with stackable adapters

Specifications

 MODEL  XPR-15CL  XPR-15CL-192
 Lifting Capacity  15,000 lbs. / 6804 kg.  15,000 lbs. / 6804 kg.
 Max Capacity/ Front Axle  7,500 lbs. / 3402 kg.  7,500 lbs. / 3402 kg.
 Max Capacity/ Rear Axle  7,500 lbs. / 3402 kg.  7,500 lbs. / 3402 kg.
 A- Height Overall*:  170 in. / 4318 mm (*)  192.7 in. / 4895 mm
 B -Width Overall  155 in. / 3937 mm  155 in. / 3937 mm
 C- Floor to Overhead Switch:  165 in. / 4191 mm (*)  187.7 in. / 4768 mm
 D -Reach (Front Arm Min.):  39 in. / 991 mm  39 in. / 991 mm
 E -Reach (Front Arm Max.):  60 in. / 1524 mm  60 in. / 1524 mm
 F- Reach (Rear Arm Min.):  39 in. / 991 mm  39 in. / 991 mm
 G- Reach (Rear Arm Max.):  60 in. / 1524 mm  60 in. / 1524 mm
 H- Min. Pad Height:  5 in. / 127 mm  5 in. / 127 mm
 I- Maximum Rise:  69 in. / 1753 mm  69 in. / 1753 mm
 J - Max Lift Height (Pad Only):  74 in. / 1880 mm  74 in. / 1880 mm
 K - Max Lift Height (6 in. Adapter):  80 in. / 2032 mm  80 in. / 2032 mm
 Standard Motor(**)  220VAC / 60Hz.1Ph.  220VAC / 60Hz.1Ph.
 Time of Full Rise:  45 Seconds  45 Seconds
 Max Load Per Arm:  3,750 lbs. / 1701 kg.  3,750 lbs. / 1701 kg.

Emission sound pressure at Operator Position < 70 dB(A)
* An optional bolt-on top extension for column raises the overhead bar an additional 24 in. Must be ordered from factory at time of order.
** For CE compliant countries see errata sheet included with control panel.
*The design, material and specifications are subject to change without notice.

Accessories

wsa-100-air-electric-work-station.png steel-lift-pads.png frame-cradle-pads.png rubber-lift-pads.png
WSA-100 STEEL LIFT PADS FRAME CRADLE PADS RUBBER LIFT PADS

Downloads

Manual

Specs Sheet

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.

Videos Hide Videos Show Videos