Free Shipping

Bendpak LR-60 6,000-Lb. Capacity Low-Rise Lift

$2,505.00
$2,095.00
(You save $410.00 )
Brand:
SKU:
5175729
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
Capacity:
6,000 Lbs

Bendpak LR-60 6,000-lb. Capacity, Low-Rise Lift

When you need a low-rise lift to add versatility and productivity to your shop or garage, your first stop should always be BendPak. Simple, safe and rugged, this rubbertopped low rise lift can handle a mighty 6,000-lb. load without hogging your precious floor space. Plus, it happily fits into narrower bays. The LR-60 is the ideal solution for quick service on today’s passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles

Features:

  • Portable version available
  • - Electric / hydraulic power system
  • - Multi-position safety locks
  • - Rubber lifting blocks included
  • - Dropped cross bar for added clearance
  • - Heavy-duty steel channel frame

Specifications:

  • Lifting Capacity: 6,000 lbs. (2,724 kg)
  • Lifting Cap.(Front): 3,000 lbs. (1,361 kg)
  • Lifting Cap.(Rear): 3,000 lbs. (1,361 kg)
  • Lift Height: 26” (660 mm)
  • Lift Height + Blocks: 27.5” (699 mm)
  • Lift Height + Optl.: 3” Blocks 29” (737 mm)
  • Overall Pad Length: 53” (1,346 mm)
  • Overall Length: 82” (2,083 mm)
  • Overall Width: 70.5” (1,791 mm)
  • Lowered Height: 4” (102 mm)
  • Lifting Time :35 sec
  • Motor :115/208-230 VAC / 50-60 Hz / 1 Ph
  • Lift Pad Dimensions: 18” x 52” (457 mm x 2,591 mm)
  • Shipping Weight: 814 lbs. (370 kg)
  • Shipping Dimensions: 82” x 70” x 20” (2,083 mm x 1,778 mm x 508 mm)

ACCESSORIES: 

LR-4A ARM KIT
 

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

BendPak Low-Rise Lifts and Rolling Jacks are warranted for one year on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the - factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty