Bendpak GrandPrix GP-9XLT 9,000 Lbs 4-Post Lift

BendPak

SKU:
BP-5175257
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Capacity:
9,000 Lbs
  • Bendpak DP-30 18 Gallon Rolling Drain Pan
  • Bendpak Wsa-100 Optional Air-Electric Workstation / Fits 2-Post & 4-Post Lifts
  • Bendpak Plastic Drip Trays Sets Of Two
  • Bendpak RJ45W, 4,500 Lbs Rolling Bridge Jack
Total Price:
MSRP: $10,314.00
$8,595.00
(You save  $1,719.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendpak GrandPrix GP-9XLT 4-Post Lift

FREE Aluminum Ramps, Caster Kit, Jack Platform and Drip Trays

The GrandPrix GP-9XLT is a four-post lift that's 24" longer and 12" taller than the standard-length GP-9F model. Perfect for parking high-stance and/or longer-wheelbase vehicles underneath.

For this lift, we took all the things you love about the GP-9F—ample drive-thru clearance, compact design and high weight capacity—and simply added more to the frame! We increased the length of this car lift by 24 inches while adding 12 inches of height to the columns.

The GP-9XLT accommodates long-wheelbase vehicles and provides a full extra foot of lifting height, making it ideal for taller techs. This unique four-post lift takes the best of two worlds, combining the rugged and dependable nature of hydraulic power with the simplicity and safety of mechanical operation.

The GP-9XLT’s rugged design sets it apart from other similar-looking lifts out there. With boxed-steel columns constructed from tough welded-steel, the support structure of this four-post lift is as strong and stable as any other commercial-grade lift’s structure.

This lift will raise and hold up to 9,000 lbs., so it’s no surprise that techs can do more in less time with GrandPrix in their shop. Simple controls offer a level of precision that’s only found among the very best products. You can expect flawless performance from your lift, no matter how often you use it.

Features

  • BendPak's proven legacy gives you an edge in performance, service and cost of ownership.
  • Designed to be fastened to the floor or free-standing.
  • Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, and hardened steel tire stops.
  • Boxed-steel columns are made from structural 4.75" x 4.75" welded steel tubing.
  • Columns feature 12" x 12" baseplates 5/8" thick.
  • Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
  • 3/4" thick steel safety locks are spring loaded for automatic and solid engagement.
  • 16 positive locking positions are spaced every 4 inches.
  • Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
  • Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
  • ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can't become dislodged or disengaged.
  • Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
  • Runways are welded and boxed for extra strength.
  • Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
  • Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
  • Low profile runways are only 5" high to accommodate low ride-height vehicles.
  • Hardened steel safety lock linkages use 3/8" molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
  • Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
  • 5/8" thick top caps.
  • Sheave axles feature hardened steel collars and snap rings.
  • Pull out tire stops on both ends of the lift that allows drive through capability.
  • Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
  • Cable keepers assures cables remain safely secure to the sheaves.
  • Pre-assembled cables simplifies installation.
  • 36" aluminum approach ramps are gusseted to eliminate flex and bending.
  • Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
  • Durable powder coat finish.
  • 3/4" runway bolts provide positive attachment with increased safety factor.
  • Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
  • Electric/hydraulic power system.
  • Single hydraulic cylinder underneath runway.
  • Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.

All Accessories Included

Standard accessories include four quick-mount casters, lightweight-yet-tough polyethylene drip trays, a mobile jack tray (wide and sturdy enough to hold bottle jacks of varying sizes and profiles) and a lightweight, easily removable aluminum approach ramp. Yep, that means one price, one selection and a helluva lot of you-get-it-all. To top it off, GrandPrix keeps your vehicles safely contained at all times with forward and rear-mounted hardened steel tire stops, as well as a set of hard-rubber wheel chocks.

bendpak grandprix aluminum ramps bendpak grandprix caster kits bendpak grandprix drips pans bendpak grandprix jack tray

 

Specifications

 Capacity  
 Lifting Capacity*  9000 lbs. (4082 kg)
 *Max Capacity / Front Axle  4500 lbs. (2041 kg)
 *Max Capacity / Rear Axle  4500 lbs. (2041 kg)
 Rise  
 A - Min. Runway Height:  5" (127 mm)
 B - Max. Rise:  82" (2083 mm)
 C - Max. Lifting Height:  87" (2210 mm)
 Time to Full Rise:  55 seconds
 Outside Dimensions  
 D - Overall Width:  114" (2896 mm)
 E - Outside Length:  200,5" (5093 mm)
 F - Overall Length:  227" (5766 mm)
 G - Height of Columns:  99" (2515 mm)
 Inside Dimensions  
 H - Width Between Columns:  98" (2489 mm)
 I - Drive-Thru Clearance:  86" (2184 mm)
 Runways  
 J - Runway Width:  18,75" (476 mm)
 K - Length of Runways:  189,75" (4820 mm)
 L - Width Between Runways:  37,5" (953 mm)
 M - Runway Centerline:  53,75" (1365 mm)
 N - Outside Edge of Runways:  72,5" (1842 mm)
 Minimum Wheelbase  
 Rated Capacity:  135" (3429 mm)
 75% Capacity:  115" (2921 mm)
 50% Capacity:  95" (2413 mm)
 25% Capacity:  80" (2032 mm)
 Locking   
 Locking Positions:  16
 Lock Spacing:  Every 4" (102 mm)
 Power Unit  
 Motor:
 STANDARD: 110VAC, 50-60HZ, 1PH, 20A or OPTIONAL:
 208-230VAC, 50-60HZ, 1PH, 25A
 Noise:  45 dB
 Shipping  
 Weight:  2,416 lbs. (1,095.9 kg)
 Dimensions:  190'' x 22'' x 35'' (4,826 mm x 558 mm x 889 mm)

5175254

 

Downloads

Manual
Specs Sheet

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.

Videos Hide Videos Show Videos