Baileigh PR-10500-4NC plate bending machine
*Images for reference only.
This numerically controlled four-roll Plate Roll features a moveable console with a 3-axis touchscreen panel. Its hydraulic motors drive planetary gearboxes for accuracy.
Forming Rolls and Hydraulics:
*All 4 forming rolls are hardened and polished.
*2 central driven rolls.
*Dual hydraulic motors and high-efficiency planetary gearboxes directly rotate the 2 driven rolls.
*4-roll design pinches the plate between the 2 driven rolls, pre-bends the leading edge, and rolls the part along with the trailing edge in one pass.
*Front rolls have independent hydraulic lifters that go in the orbital pattern.
*Stabilizer torsion bar system keeps front rolls parallel to the top roll.
*Plate is always pinched during the rolling cycle, so there’s no chance to lose the position.
*You can adjust the angle of the rolls and bend cones.
*Hydraulic system for material removal: yoke on top roll drops, allowing the roll to lift.
Console and NC System:
*Conveniently movable operator console with control panel.
*Touchscreen controls 3 bending axes (X Y Z), 2 side supports, central support, and the pinching action.
*Memory can store 300 programs with 99 steps each, great for those odd-shaped jobs.
*Toggles let you operate the machine in manual mode.
*You can incrementally enter desired bend points, then store them for a later date.
*2 DROs on the control panel show the front and back roll positions for repeatability.
Warranty and After-Care:
*Comes with lifetime technical support by phone from our in-house team of knowledgeable reps.
*Free machine training and demos are available at our Wisconsin headquarters. Optional training at your location is available for a fee.
Also available in a non-NC version, the PR-10500-4, and a CNC version, the PR-10500-4CNC.
Questions? Not sure which plate roll is right for you? Call us and talk to an expert.
- Made in Italy and refined through years of extensive research
- ½” mild steel capacity
- 120” (10-foot) length
- Large 10 hp motor runs on 480-volt 3-phase power
- Console and NC System
- 4-roll design pinches the plate between the 2 driven rolls, pre-bends the leading edge, and rolls the part along with the trailing edge in one pass
|Maximum Forming Length (In.)
|10 HP 3 ~ 480V
|Motor Voltage (V.)
*Specifications subject to change without notice.
WARNING: California's Proposition 65
For more information; visit www.p65warnings.ca.gov.
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791