Factory Shipped
Baileigh PL-1340E metal lathe
This gear-head metal lathe includes many features that competing models don’t, like a DRO and quick-change tool post. It’s a great value for small- to medium-sized shops.
Features
- 8 spindle speeds, from 70 to 2,000 rpm.
- Runs on 220-volt single-phase power.
- Digital readout (DRO) comes hooked up and helps with repeatability.
- Quick-change tool post saves you the trouble of screwing and unscrewing tool sets.
- Precision-ground and hardened ways offer years of tight tolerances.
- Can cut both metric and standard threads.
- 3-jaw and 4-jaw chucks can hold square and rounded materials.
- Face plate lets you bolt large but not long pieces in place.
- Steady rest and follow rest brace the shaft and help prevent wobbling.
- Foot brake makes it easy to stop the machine in an emergency.
- Integrated coolant system extends the lathe’s lifetime of use.
- Halogen work light comes standard.
- Rigid castings ensure smooth chatter-free cuts and prolong tooling life.
Specifications
Item Number | PL-1340E-1.0 |
Sleeve Travel | 4.5" |
Spindle Bore | 1.50" |
Spindle Bore Taper | Morse #5 |
Sleeve Taper | Morse #3 |
Sleeve Diameter | 1.65" |
Range Of Inch Threads | 4 - 56 T.P.I. |
Metric Thread Range | 0.4 – 7 mm |
Spindle Nose | D1-4" |
Travel Of Cross Slide | 6.29" |
Travel Of Top Slide | 2.68" |
Width Of Bed | 7.375" |
Spindle Speed | 8 (70 – 2000 rpm) |
Swing In Gap | 18.750" |
Swing Over Bed | 13" |
Swing Over Cross Slide | 7.750" |
Longitudinal Feed Range | 0.002" – 0.0548"/rev |
Lead Screw Thread Pitch | 8 T.P.I. |
Length Of Gap | 5" |
Max. Tool Selection | .625" x .625" |
Cross Feed Range | 0.007" – 0.0187"/rev |
Distance Between Centers | 3667 |
Power | 220V Single Phase |
Shipping Weight | 1515lbs |
Shipping Dimensions (Inches) | 79x44x63 |
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Downloads
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791