null

Baileigh BP-9078NC Hydraulic Press Brake

Brand:
Baileigh
SKU:
1000839
Condition:
New

Factory Shipped

Total Price:
$85,387.36 $70,319.00
(You save $15,068.36)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Baileigh BP-9078NC Hydraulic Press Brake

It weighs 8,800 lbs. with a rigid steel frame. The encoder-controlled stroke and back gauge system offers 2 DROs and takes just 5 minutes to learn.

  • Delivers up to 90 tons of pressure.
  • Bends sheet metal up to 78” wide.
  • 10 hp main motor runs on 220-volt 3-phase power.

Powerful, easy-to-use hydraulic system

  • Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
  • 2 encoder-controlled hydraulic cylinders move the top beam.
  • Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
  • It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
  • You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won't lose its shape.
  • 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
  • Foot pedal brings the stroke up and down, leaving your hands free to position the material.
  • Motorized back gauge rides on a solid ball screw trolley mechanism.
  • Back gauge encoder shows its position on its own DRO.
  • Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

Rigid structure and low maintenance

  • Heavy electrowelded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.
  • Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
  • Includes a set of hardened single-Vee American tooling.
  • Accepts standard press brake tooling, giving you a wide variety of options.
  • Comes with front material rests (or support arms), which some competing machines do not include.
  • 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
  • 4 grease zerks let you add oil every few months.
  • Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Typically in stock and usually ships in 72 hours.

Specifications

 Item Number  BP-9078NC
 Back Gauge Length  17144
 Return Speed  2.36" / sec.
 Motor  10 hp
 Oil Capacity  45 gal
 Throat Depth  7.87"
 Stroke Distance  5.9"
 Table Width  6.29"
 Approach Speed  3.14" / sec.
 Back Gauge Motor  1/2 hp
 Bed Length  17145
 Bending Speed  .236" / sec
 Maximum Capacity  90 tons
 Distance Between Housings  61"
 Distance From Table To Ram  11.81"
 Power  220V / 3-phase
 Shipping Weight  8800lbs
 Shipping Dimensions (Inches)  103x85x100

*Specifications subject to change without notice.

WARNING CA Proposition 65 Message

65-warning.png

Warranty Information

Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.

Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.

If you have any questions about warranty information, please contact us at 800-562-4791

Frequently Bought Together

Please choose options for all selected products

  • Choose Options