Baileigh SD-255 220V Single Phase 3 hp 25" x 5" Drum Sander with Variable Speed Conveyor
*Image is for reference only. Real product may differ.
This 25”-wide heavy-duty drum sander is a perfect choice for small businesses and hobbyists that are sanding panels around 3 to 5 hours a day. It’s an economical alternative to a planer.
- Maximum thickness of 5” and minimum of ¼”.
- Dual 5” sanding drums turns at 1,800 rpm.
- Variable speed conveyor can adjust from 6 to 24 feet per minute.
- 3 hp main motor runs on 220-volt single-phase power.
- Convenient adjustment screw ensures that the sanding drum stays parallel to the conveyor belt.
- Easy-to-access drums allow for convenient sandpaper changes.
- Includes 2 dust ports (4”) that you can hook up to a dust collector to keep your shop air clean and safe.
- 2 drums let you use different abrasives at once: for instance, 120 grit for taking material off, then 220 grit to refine the surface.
- Rigid steel base keeps vibrations down to a minimum. Most competitors can’t match the sheer structural strength of our sanders.
|Max Stock Width||25"|
|Maximum Stock Height||5"|
|Minimum Stock Thickness||1/4"|
|Minimum Stock Length||6"|
|Feed Speed||6 to 24 FPM|
|Power||220V Single Phase|
|Shipping Dimensions (Inches)||60x44x57|
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791