Baileigh RTS-3012 30" x 12" Sliding Router Table, Table Tilts to 45 degrees for Easy Access to Rounter(Not Included)
*Images for reference only.
*Please note: Router not included.
The RTS-3012 Table makes routing large pieces of wood easier than if you did it by hand. You can take the table with you anywhere to put a bead on the edge of trim or baseboard.
Features
- Machined cast aluminum sliding table with a table tilt of 45° to give you access to the router (router not included)
- 30” x 10” main table with 2” wider sliding portion
- 10.5” x 2” fence with 2 different table inserts: 4” x 2-1/4” and 4” x 1-1/8”
- Adjustable rip fence helps you make straight, repeatable cuts
- Comes with a miter gauge for measuring cutting angles and clamps that hold material firmly in place while you cut
- All-steel stand is rigid and strong enough to handle any router model and reduce vibrations
- Weighs 115 lbs., so you can bring it to job sites
- Integrated 110-volt port on the table to plug your router into
- Dust hood keeps sawdust and wood shavings concentrated in the center for a fast clean-up
- Emergency stop button is within reach while you’re working, to protect your safety
Specifications
| Fence Size | 10.5" x 2" (L x H) (In.) |
| Model Number | RTS-3012 |
| Shipping Dimensions | 48x45x13 (L x W x H) (In.) |
| Table Width | 12.2" (In.) |
| Weight | 150 (Lbs.) |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
