Baileigh IJ-1288P-HH Long Bed Parallelogram Jointer With Helical Cutter Head
*Images for reference only.
Our largest jointer, the IJ-1288P-HH makes your shop safer, thanks to its parallelogram design. The 12” width and 5 hp motor open possibilities by letting you tackle big pieces of lumber.
Features
- Runs on 220-volt single-phase power, so it will work almost anywhere
- Straight 4-row spiral cutter head (4” diameter) spins at 5,500 rpm
- Extra-long 88” bed offers better work support for large pieces
- 6” x 47” fence tilts in and out with stops at 90° and 45° for edge joining
- Convenient handwheel lets you adjust the cut depth up to ⅛”
- Digital read out for depth of cut, makes repeating cuts easy
- Non-mar insert in the fence prevents the table from scratching the surface during adjustments
- Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining
- Parallelogram-style table stays close to the cutter and maintains a narrow, consistent gap, regardless of the cut depth
Specifications
| Cutterhead Diameter (In.) | 4" |
| Cutterhead Speed (RPM) | 5500.0000 |
| Dust Port Outside Diameter (In.) | 6 |
| Fence Size (L x H) (In.) | 6" x 47" |
| Fence Tilt (Deg.) | Yes |
| Model Number | IJ-1288P-HH |
| Motor Voltage (V.) | 220V Single Phase |
| Number of Knives | 56 |
| Prewired Voltage (V.) | 220 |
| Max.Rabbeting Capacity (In.) | 3/4" |
| Rabbeting Ledge (In.) | 3" x 13-3/4" |
| Type of Cutterhead | Straight Knife |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
