Hofmann MONTY1625B Monty 1625 Swing-Arm Tire Changer
The Monty 1625 tire changer is designed for high-volume tire shops, multi-bay repair shops, and car dealerships. The Monty 1625 series swing-arm tire changers feature a 24" outer-wheel clamping standard (28" with optional adapters). These tire changers feature a four-jaw clamping chuck which is self-centering and clamps wheels with either a 26" inner or 24" outer diameter.
Features
- Accommodates Large Wheel & Tire Assemblies: Allowing for a tire diameter of 50" on the Monty 1625 (42" on Monty 1625EM), and outer-wheel diameters of 24". The Monty 1625 can handle wheel and tire assemblies found on cars and light trucks.
- Dual Wheel Clamping Cylinders: Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage.
- Four-Jaw Clamping Chuck: Self-centering and clamps wheels with either 24" outer diameter.
- Multi-Position Bead Breaker: 6,000 lbs of power at the bead shovel and a range of up to 18" wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed.
- Powerful Tire Inflation System: Powerful air blast operated by the foot pedal. Each movable jaw is precisely set to the exact position under the wheel to seal the tire bead.
- Built To Last: Heavy, solid 1/2" thick steel clamping table. Rugged steel-reinforced chassis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board.
Specifications
Part Number | MONTY1625B |
Max Rim Diameter | 24” / 61cm |
Max Tire Width | 15” / 38cm |
Max Rim Width | 14” / 36cm |
Max Wheel Diameter | 50” / 127cm |
Power Supply | 115V 1Ph 60Hz |
Air Pressure Required | 116-174 PSI / 8-12 bar |
Dimensions H x W x D | 82” x 49” x 52” / 208 x 124 x 132cm |
Also available with:
Downloads
Hofmann equipment Warranty Policy
Hofmann USA products carry the following warranties:
1. HOFMANN WHEL BALANCERS:
- LABOR 6 MONTHS
- PARTS 1 YEAR
- ELECTRONIC CIRCUIT BOARD 3 YEARS
- ELECTRIC MOTOR 5 YEARS
2. HOFMANN BRAKE LATHES:
- LABOR - 6 MONTHS
- PARTS - 2 YEARS
- ELECTRIC MOTOR - 1 YEAR
3. HOFMANN TIRE CHANGERS:
- LABOR - 6 MONTHS
- PARTS - 1 YEAR
- ELECTRIC MOTOR - 3 YEARS
- AIR MOTOR - 1 YEAR
- TRANMISSION - 3 YEARS
4. HOFMANN WHEEL ALIGNERS:
- LABOR - 6 MONTHS
- CIRCUIT BOARDS, PC’S, CRT & LCD - 3 YEARS
- PARTS & PRINTER - 1 YEAR
5. HOFMANN LIFTS:
- LABOR - 1 YEAR
- PARTS - 1 YEAR
- POWER PACK - 18 MONTHS (1 YEAR SCISSOR ALIGNMENT)
- HYDRAULICS - 1 YEAR