EMAX 100HP 3 Phase Rotary Screw : 575CFM Dryer : 660 Gallon Gallon Vertical Tank - Black W/ Auto Drain & Hydraulic Hose

This package contains: 

(1) EMAX E4500 Series – 100 HP Direct Drive Rotary Screw Air Compressor, 3 Phase, Variable Speed-ERV1000003D

(1) EMAX 575 CFM Refrigerated Air Dryer, EMAX Industrial-EDRCF2300575

(1) EMAX 660 gallon vertical tank

EMAX Rotary Screw 100HP Three Phase-Variable Speed Direct Drive

Features

• Variable Speed - Slow Start
• SPIN-TEKTM - Easy Access Oil, Air Filters and Separator Requires Not Tools to Remove Or Install
• Components from US, Germany, Finland and Italy
• Variable Speed Reduces Energy Demand up to 33%
• 70,000 + Running HoursVariable Speed ready to Control the speed of the motor
• Adjust Pressure – to what pressure range you need. This can be set by the customer, this unit has a shutdown in case the unit goes over pressure. the unit has a maximum pressure setting – the computer will sense that it is going over pressure and will shut down.
• Low Oil Shutdown – if the controller senses that the unit is going into high temperature it will shut it down. It will also shut down if the compressor runs low on oil.
• Reverse Fault – the controller will control when the unit is wired up if it is running backwards, it will sense a reverse rotation fault and shut the unit down
• High Voltage Fault – if the voltage is 15% over the power supply voltage rated on the EMAX compressor data plate, the unit will shut down. Also if the voltage is 15% under it will shut is down as well.
• Over AMP Shut down – if the motor is pulling to many amps it will shut down. You can check the amp draw of the electric motor as it is running and also on the exhaust fan motor
• Clock and Date – Built in Clock and Date to help keep track of preventative maintenance services.
• Light – Has a built in light for dark locations.
• Parameters- has a maintenance parameter system to create and maintain the parameter and control information.
• Hour meter – Built in hour meter to keep track of the running hour on the machine.
• Fault History -The PLC stores history if the unit shuts down, information on why it shut down is stored
• Maintenance Service – Keeps track of when to change the air filter, oil filter and the coalescing filter along with the unit needs greased. When they need changed the PLC will sound an alarm.After changing you simply reset that filter back to zero and start the maintenance tracker again.
• Air Differential Control- with differential control you have a wide range of pressure settings. You can take the kick-in pressure all the way down to 100 PSI and all the way up to 145 PSI. You can adjust this range anywhere in between. You can also set the high end down to a lower pressure where ever the customer unit pressure is desired. The Emax Compressor is factory set at 120 kick in and 145 kick out. The lower the pressure the higher CFM and the more hours you will get on your screw compressor, so keep the pressure as low as possible.
• Built in Timer -will sense when the unit is not being used for a period of 20 minutes under no load, this will shut down the machine automatically so it will restart as air pressure goes down to the kick- in set point.
• On-line demand – this setting is made for high volume and will bypass the automatic kick-off mode. It allows the unit to keep running on continuous run mode for high air demand.
• Warranty – These PLC’s carry a 5 year warranty
• Daily / weekly Schedule – This unit can be programmed to start in the morning, can shuts its self at lunch if needed and can turn itself in the even as well, or when ever needed.
• Self Start – if the power is lost this unit will automatically restart itself, this eliminates a maintenance crew to have to restart after the shut down.
• Master Slave – this controller can switch from one unit to the other and maintain the same use of hours, it can adjust the pressure to be the lead or the lag unit.

Dimensions

• LBS Width: 85.00 (in)
• Height: 72.00 (in)
• Depth: 56.00 (in)

Specifications

• 100 HP, Three Phase
• 423 CFM @ 100 psi
• 145 psi Max Pressure
• Y/Delta
• Direct Drive
• 2" NPT Outlet
• 3496 lbs
• 8000 Hour Lubricant

EMAX 288CFM 230V Refrigerated Air Dryer

Our EMAX air dryer is the only energy efficient dryer systems with aluminum refrigerated air inner cooler. The air is filtered of all solid particles 0.01 micron and larger. Clean, dry compressed air leaving the dryer minimizes maintenance and repair and also reduces internal dryer contamination. We designed them with Non-corrosive inner and after cooler. Our dryers feature stainless steel heat exchanger for maximum dryer life and less maintenance. Emax Air dryers are UL-CSA approved scroll compressor & electric system for high efficiency and durability. They feature adjustable hot bypass for complete dryer function in low and high CFM flow preventing dryer freeze up.

Features

• Refrigerant Pressure Gauge
• Auto Drain System
• Outlet Air Baffle Heater
• Purifies compressed air by chilling to condense moisture
• Condensate is drained carrying oil & dirt partials away from the air
• Auto drain system – eliminates the need for daily maintenance
• Refrigerant pressure – gauge clearly monitors performance of dew point temp (models under 400 CFM)
• PLC Display (models 400 CFM & above)
• Outlet air baffle heater – prevents condensation on outlet air piping
• Heavy duty steel cabinet
• Trouble free operation refrigerated air inlet inner cooler for high temp cooling
• Top mounted condenser & fan motor
• Environmentally friendly 134A refrigerant

Specifications

EMAX 660 Gallon Vertical Tank

Features

• Air Storage Tank to use with Rotary Screw Air Compressors
• Comes with automatic tank drain
• Hydraulic hose
• 660 Gallon
• Vertical

Energy efficiency and MAXimum performance. Leaders in industrial air technology. Innovation is in the air.