42"L, 10"W, 4"H with 1" HD notch, 5.22° Angle, First Half of 7 Series 2pc.
Tow like a pro with our HD Tow Ramps.
You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it’s safe in your hands, too. The 1″ x 5″ notch in these Tow Ramps enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car.
7″ HD Tow Ramps give the vehicle 7″ of lift over a 5.2 degree angle of approach. They are 74″ long and 10” wide (for tires up to 8” wide). These come in a one-piece or two-piece design. The two-piece version is designed such that you may be able to use only the initial section of the ramp at times – you may not always need the full 74” of length (you can also purchase just this 4.5″ high section as BB-TT-7-10-IS). These also come in HD, for a total vehicle weight capacity of 10,000 lbs. If you need a lower angle of approach, you can pair either set of the 7″ HD Tow Ramps with this XTender.
All of our Tow Ramps are 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea. This patented process results in a product that is extremely lightweight, yet strong and durable. The ramps will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramps to be used on gravel or other rough surfaces that you may encounter along the side of the road.
We are on a mission to “ban the board” – use our Tow Ramps to load cars quickly and, most importantly, safely . . . for your sake and the sake of the car!
When buying directly from this site, the set of two ramps comes with a 30-day satisfaction guarantee. Proudly handmade in the USA!
|WEIGHT:||10 lbs. per ramp|
|APPROACH ANGLE:||5.2 degrees|
|WEIGHT CAPACITY:||2,500 lbs. per ramp|