Baileigh BP-11210CNC Press Brake

*Image is for reference only. Real product may differ

Image # 4 *All dimensions is millimeters, unless otherwise noted

With 102” between all-steel uprights, this hydraulic press brake can bend 8-foot sheets of metal. The control system offers the latest technology for a fraction of the cost of other brands.

Features

• Delivers 120 tons of pressure.
• Distance between the housings lets you slide in 8-footpieces of mild steel.
• Runs on 220-volt 3-phase power.
• Industrial-grade hydraulic system with a Vickers/Eaton pump will last for many years at peak capacity.
• NOK hydraulic seals from Japan are some of the best in the industry. They’ll keep the hydraulics running smoothly.
• Torque tube connects the 2 hydraulic cylinders, so they stay synchronized and parallel to the bending table at all times.
• Chain drive linkage keeps hydraulic cylinders in time with each other, so the machine stays balanced and lasts longer.
• Hydraulic cylinders are near the back of the machine for convenient fluid changes. 

Accurate, User-Friendly Control System

• Runs in single-bend mode or programmable mode.
• Comes standard with 2 axes of control: stroke and back gauge distance.
• Simple controller is so intuitive that you could train someone to use it in 5 minutes.
• Programmer stores up to 40 programs with up to 25 bends per program, great for saving time on production.
• Bending is accurate to +/- .01mm, ensuring that parts come out right the first time.
• Main electrical components made in Germany by Weidmueller and Schneider® will give you years of trouble-free productivity.
• Foot pedal brings the stroke up and down. Just input your specs on the controller, then press the pedal for each bend.
• You can make a complete part without touching the controller. Push the metal in while pressing the foot pedal.
• Choose between 2 speeds: a rapid approach and retract and a slow bending speed.
• Speed option lets you reduce cycle time and make your shop more efficient.
• Chain drive back gauge system uses tried-and-true technology that you can maintain easily.
• The 23.62" back gauge can advance or retract according to programmed instructions. 

Steel Plate Construction And Included Tooling

• Fully-welded all-steel construction helps prevent deformation and minimize flex during the bending process.
• Weighs a whopping 14,403 lbs. for massive structural strength that ensures accurate results.
• Includes support arms around 2 feet in length.
• Comes standard with tooling: a multi-vee bottom die and gooseneck punches (European Style).
• Quick-release tool holders let you make changes easily. Just open a lever and it drops the top die out. No time-consuming cap screws!
• Crowning adjustment dial gives you the option to deliver more pressure in the center of a bend for consistency all the way across.
• Safety light curtains prevent the machine from bending when someone is too close.
• Light curtains will swing open and get out of the way when you’re doing a tool change. 

Fast Shipping And Lifetime After-Sale Care

• This hydraulic press brake ships fully assembled. Just uncrate it, plug it in, and get started.
• We keep machine handling to a minimum to reduce the risk of damage. The flatbed truck that leaves our facilities is the one that shows up at your door.
• Replacement parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.

Specifications

Note: *Specifications subject to change without notice.

WARNING: Cancer and Reproductive Harm